ljlemer
Tuesday, June 5, 2007 11:54:00 PM
First, to all the purists and old-timers, I did run a search to find the answer to my question. My apologies if I'm repeating another old question. My new humidifier came with one of those simple, cheap, black plastic humidifiers that are shaped like a hockey puck. I've already learned that it probably contains a green foam and that it should be moistened with a certain solution, which I have, or just with distilled water. My question is how the heck do you open them? I've had no success.
diverbelow72
Wednesday, June 6, 2007 2:20:00 AM
They do come apart, just takes some patience and a little work at first. It is actually three pieces, get a small screwdriver or knife to get between the pieces and pull apart without breaking. I have taken the few that I have left so many time I can do it by hand now. There are little tabs inside that catch and are barely visible. Trial and error, good luck.

Diver

jojoc
Wednesday, June 6, 2007 7:42:00 AM
what Diver said. Once open, toss the green stuff and fill with beads.

my .02

donutboy2000
Wednesday, June 6, 2007 11:45:00 AM
Hammer
ljlemer
Thursday, June 7, 2007 6:46:00 AM
I was going to moisten the green foam with a 50/50 solution. I have no beads at the moment. Anything wrong with that? The sealed plastic container has the air holes sealed. Once primed, shouldn't those air holes be exposed?
Sfraun04
Thursday, June 7, 2007 7:14:00 AM
Here's an easier way to humidify the foam without opening it. Pour your distilled water into a wide bowl, and place the humidifier with the holes face down in the distilled water. When the air bubbbles stop, it should be good to go. Wipe down the outside before placing in your humidor.