wincav
  • wincav
  • Enthusiast Topic Starter
Monday, July 23, 2007 12:01:00 PM
One of the most frustrating things when lighting a cigar is when you clip the end with a very sharp quality cutter and the cap cracks. It doesn't make for an enjoyable experience thereafter. I have recently seen some cigars advertised as having a triple cap. Someting about the "old fashioned" Cuban way. Is a triple cap actually three layers or what is it that makes this a special cap versus the other caps most manufacturers use? AND...will this help reduce the occasional problem of cracking the cap? Thanks.
Fiano
Monday, July 23, 2007 12:20:00 PM
I've found that triple capped cigars tend to hold-up better when clipped. These are usually super-premium smokes (Pepin/Tatuaje/most Cubans). I'm not sure if the triple cap keeps it from cracking, or maybe it's just the great construction that you usually find in that price range ($10 and up retail). I usually moisten the end a bit before cutting or puncing any cigar. I rarely get cracks when I do that.
ffbking
Monday, July 23, 2007 12:33:00 PM
Something I have been wondering for a while.......are you supposed to clip in the cap itself? How far up the stick should you cut?

ffbking

Fiano
Monday, July 23, 2007 12:44:00 PM
I've asked this question to quite a few manufacturers and almost all of them say to put your cutter on a flat surface and put your cigar in the hole vertically. Clip the cigar and it should be straight and perfect.
JIDO1960
Monday, July 23, 2007 12:57:00 PM
That's exactly what I do - but most of the time I use a high quality punch - before I put the hole in it I always wet the cigar - less problems.

The larger the ring size the more I enjoy wetting the cigar - LOL

Nick

Did I leave myself wide open?????

Fiano
Monday, July 23, 2007 1:06:00 PM
Ha! It took me three rewrites to come up with "moisten the end".
pacman357
Monday, July 23, 2007 1:31:00 PM
Ran into this with a bullet punch I got here. Turns out the thing was so dull a 5 year old couldn't have hurt himself with it. Sharpened it with a dremmel tool and sharpening cone, works much better now.
ffbking
Monday, July 23, 2007 1:31:00 PM
#4 - Thanks! I am going to try that tonight.

ffbking

rfenst
Monday, July 23, 2007 2:07:00 PM
Remind me to let you cut my cigar with your cutter, after you have used it to cut the end of your "moistend" cigar...
Mr. Jones
Tuesday, July 24, 2007 9:12:00 AM
I've had Fonseco Predilictos and Montecristos that have thick caps (triple? I'm not sure). But one cigar I really like has a Very thin wrapper and cap; they are 5 Vegas 'A'. I punch or cut the end before dry boxing.
diverbelow72
Tuesday, July 24, 2007 4:24:00 PM
#4, that tends to work best and is what I normally do if I cut. I normally punch, either way I like to "moisten" the cap first.

Threadjack on:

Pac, I saw you posted about sharpening your bullet with a dremel a while back on a different thread, you are pretty sharp for a lawyer, lol. Great idea I did the same thing and my caps don't split when I punch anymore. Thanks!!

Threadjack off:

Diver

pacman357
Tuesday, July 24, 2007 4:43:00 PM
#11 Despite my best efforts, I manage to contribute to society in small (very small) but meaningful ways. Glad to help.