mikeking
Wednesday, September 19, 2007 5:34:00 PM
I just got a zicar lighter. I lights, but sometimes I'll flick it and even though the ignition sparks, and I hear gas flowing, it doesn't light, or it lights and then burns out immediately. Then, later on, no problem at all. What am I doing wrong? I've tried different flame sizes but no difference.

pacman357
Wednesday, September 19, 2007 5:40:00 PM
Did you purge it first? Try pressing a small screwdriver or a ballpoint pen on the small nozzle on the bottom, where you fill it. If you still have trouble, try a higher quality butane, one that has been refined a bunch. Or go with wooden matches.
Thunder.Gerbil
Wednesday, September 19, 2007 5:40:00 PM
Purge it and refil with quality butane.

If that fails, send it back and get a Ronson.

diverbelow72
Wednesday, September 19, 2007 5:52:00 PM
also maybe try to adjust the size of flame, if it is too low then it may not always light and stay lit. if that combined with the above does not work maybe have to do like they said. I got a cheap lighter and it uses cheap fuel. I have had it over a year and no problems so far.

Diver

pacman357
Wednesday, September 19, 2007 6:10:00 PM
Ha! Got in line before TG. Just like at Heynow's house!
diverbelow72
Wednesday, September 19, 2007 6:12:00 PM
^ Thats soo wrong Pac!
Thunder.Gerbil
Wednesday, September 19, 2007 6:19:00 PM
^

But if you notice it only took Pac less than a minute to finish and get out of the way.

diverbelow72
Wednesday, September 19, 2007 6:57:00 PM
^ Yeah typical lawyer, screw someone as fast as possible then get out.

donutboy2000
Wednesday, September 19, 2007 7:57:00 PM
LOL!!!
Slimboli
Thursday, September 20, 2007 3:07:00 AM
Zicar ?!? You mean Xicar ... right ???
Odylic
Thursday, September 20, 2007 3:25:00 AM
slim-

don't you mean Xikar?

LOL

engletl
Thursday, September 20, 2007 3:44:00 AM
Ya know if you would have bought a Xikar there wouldn't be this problem...LOL

Honostly what pacman and TG said in posts 2 & 3 should solve the problem

Todd

dunkaroos
Thursday, September 20, 2007 6:20:00 AM
I have 2 of the lighters and just purged them this last weekend because I was having the same problem you were. Use a small phillips head screwdriver and press in the metal nozzle where you fill the lighter. You may do this several times before it stops "hissing". It may smell funny too. Once all the hissing stops, fill the lighter with fluid, wait a few minutes and try lighting again. Should work.
pacman357
Thursday, September 20, 2007 9:51:00 AM
"It may smell funny too." That's a relief. I thought it was me.