ddandb
  • ddandb
  • Herf-A-Holic Topic Starter
Monday, December 1, 2008 6:40:00 AM
We have some food warmers to plug in at work but the plugs are a little odd looking and I don't know what I need.

It's three pronged plug but the one prong is turned sideways.

So looking directly at it with the ground at the top... the prong to the right is vertical and the one on the left is horizontal.

Is this something I can get an adapter for, put in a new outlet, or call an electrician?

usahog
Monday, December 1, 2008 6:41:00 AM
220

usahog
Monday, December 1, 2008 6:42:00 AM
are the covers red?

you'll warm the food up fast with those baby's...

BuckyB93
Monday, December 1, 2008 6:44:00 AM
Call an electrician. That “funny” plug is indicating that the appliance needs to be plugged into a 20 amp circuit. The standard plugs that you are use to seeing are 15 amp plugs.
blackfoot11
Monday, December 1, 2008 6:54:00 AM
they are also used for 220 as hog stated so's ya don't use the wrong voltage.

could be either.............

andytv
Monday, December 1, 2008 6:57:00 AM
Look closely at the plugs.......they should have a NEMA identification (numerical). This "code" designated the voltage and current appropriate for the device.
Cousin_Eddie
Monday, December 1, 2008 6:59:00 AM
Just use a pair of pliers and bend it the right way. It was probably a mess up at the factory if bending it doesn't work just grind the plug down until it fits.

I'm joking of course!!!

ddandb
  • ddandb
  • Herf-A-Holic Topic Starter
Monday, December 1, 2008 7:00:00 AM
I know we have some Heater/Air-conditioning combos that we had to get an electrician in for. These plugs were the direct opposite of the ones I have now with the left prong vertical and the right one horizontal.

I didn't know if that made a difference or not.

ddandb
  • ddandb
  • Herf-A-Holic Topic Starter
Monday, December 1, 2008 7:02:00 AM
Thank you #7. That seems to work.

Hey, should smoke be coming out of the outlet like this??

Ram27
Monday, December 1, 2008 7:15:00 AM
Don't panic Rich, I just submitted a picture for you, should help out.
ddandb
  • ddandb
  • Herf-A-Holic Topic Starter
Monday, December 1, 2008 7:15:00 AM
The cord has a blue tag on it that says 20A...125V....2500W.
ScottHar
Monday, December 1, 2008 7:18:00 AM
re 7: "Just use a pair of pliers and bend it the right way. It was probably a mess up at the factory if bending it doesn't work just grind the plug down until it fits."

Dad? Is that you?

ScottHar

00camper
Monday, December 1, 2008 7:51:00 AM
ddandb

The warmers require a 20 amp circuit. The "standard" household/office outlet is 15 amp. That's why one of the prongs is turned sideways.

ddandb
  • ddandb
  • Herf-A-Holic Topic Starter
Monday, December 1, 2008 8:13:00 AM
Ok, called the electrician.

Thanks everyone.

Smashed247
Monday, December 1, 2008 8:16:00 AM
I only handle plumbing issues.
DrMaddVibe
Monday, December 1, 2008 8:20:00 AM
220, 221...whatever it takes.
ddandb
  • ddandb
  • Herf-A-Holic Topic Starter
Monday, December 1, 2008 8:30:00 AM
Hey Smashed I have a plumbing issue also.

I haven't taken a dump since Thanksgiving and I'm usually a twice a day guy.

What da ya recommend?

plinytheelder
Monday, December 1, 2008 8:33:00 AM
Go to Country's Dr.

Thay have a mirror and everything...

teedubbya
Monday, December 1, 2008 8:34:00 AM
ddandb quit "dateing" for a few days and things will start going the right direciton again.
Goathead50
Monday, December 1, 2008 8:35:00 AM
20 amp 220 volt. - l

0