9.......
Every rod blank has a preference to flex one way......has to do with the way they are built. When a rod builder determines where to place the rod guides and reel seat (along the diameter of the blank), he should identify this axis and place the parts appropriately.
When a rod is NOT splined properly, it will not cast as well and can fail (break) under tension.
You'd be surprised......most of the cheap rods for sale in the big stores are not splined properly. It doesn't jive well with automated production.
Seeing a rod that is bent with the guides not directly on top (with the reel in the picture), or below (with a spinning reel) could indicated this is the case.
With Ugly sticks used as downrigger rods, I'd say it wouldn't be a big deal since they are so damn tough and you don't need to cast accurately.
#10........I built a half dozen or so rods and gave up.
I used good materials, but broke one once (a VERY light trout rod). Once you break it, there is no replacement warranty.......and if you did it for a business, you'd be dealing with people wanting replacement.
Anyways.........for standard duty rods, best off with a St. Croix, Loomis, Cabela's rod, etc.......they replace rods for free (or they USED to).
I built a lot of really cool special purpose rods and then sort of figured I was through with it.
I do this sort of thing all the time.......get interested in something, dive into it, figure it all out, then walk away.......I guess I just like to know how to do stuff.