BornADuck
Sunday, February 6, 2005 7:31:00 AM
I just refinished a 50+ year old humidor I received from my Grandfather-in-law with minwax polyurethane (only the outside). How long should it cure before I can safely put cigars back in there without destroying them?

Thanks a bunch!!

BornADuck

rick.irwin at ensembleware dot com

BornADuck
Sunday, February 6, 2005 9:01:00 AM
anyone? anyone? a guess? I need the room...hahaha
Gandalf
Sunday, February 6, 2005 9:17:00 AM
In theory, as long as you didn't get finish on ANY part of the inside of the humidor, you should be OK. Personally, I would place the humi in a warm, dry, well ventilated area for several weeks, even if you used a water based finish. The volatiles in the finish will gas over a relatively long period of time, even though the finish is 'hard'. General rule of thumb is if you can still smell it at ANY distance, it is still gassing.

Put a small container of distilled water inside to condition the humidor while you wait, and monitor it regularly to purge any odors that could possibily be building up inside.

Next time, try a laquer based finish if you can. Something like Deft should work nicely - depending on the original finish. You would need to test a small area for compatibility before applying to the whole box.

It will cure and degass in a much shorter period of time.

JMHO

BornADuck
Sunday, February 6, 2005 9:24:00 AM
Great info gandalf907. Thought it might be a few weeks.

I removed the 1/16 inch thick ceder inserts that actually make a box within a box and am keeping them in zip-lock bags to preserve there already developed character.

Thanks a bunch!!!

usahog
Sunday, February 6, 2005 9:39:00 AM
To add to Gands reply... you need to keep it in a temp controled at least 70 or above and well ventilated to allow air movement to circulate around it...

I use waterbased Poly to seal all my work dealing with cigars "Pacific Strong" it's biodegradable and works better (IMHO) then oil based poly's without the residue or smell along with it....

usually two weeks would be the norm... but if it's in a fluxuating temprature.. it will take longer

Hog

BornADuck
Sunday, February 6, 2005 10:04:00 AM
thanks Hog. Appreciate it.

Should have known better than to ask after the fact. Would have done things differently if I would have known.

You guys are GREAT!!!

xrundog
Sunday, February 6, 2005 10:19:00 AM
As long as we are talking preferences, I use either tung oil varnish or an oil finish on the old humidors I restore. Gives a better vintage look. Your finish should be okay after a week or so. The old cedar inserts are often mildewed. Smell test them well. There was no RH control in the old days. Humidifiers were clay or sponge based.
BornADuck
Sunday, February 6, 2005 10:42:00 AM
OK xrundog. The inserts seem in fine shape. When I pulled them out, I found a few little pieces of dried flowers in there. Don't know if it was ever used as a humidor or for how long. When I got it, it was storing very old birth cert, WWII Medals etc, but think someone was pressing/drying flowers at some point. They smell good.

Again...thanks folks

Gandalf
Monday, February 7, 2005 8:44:00 AM
Tim;

Do you use a drying agent (like Japanese Drier) when applying an oil finish? I've thought about using a hand rubbed finish since it really brings out the character of the wood, but I'd be concerned over the tendancy of such a finish to stay "soft" and smell for an extended period of time. What is your preference?

Sorry for the threadjack, but this is good info for anyone interested in applying a vintage finish to an old humidor.

BornADuck
Monday, February 7, 2005 9:09:00 AM
Good info Gandolf...

Again, I wish I had posted this before actually refinishing the old box...it's beautiful.

xrundog
Monday, February 7, 2005 9:33:00 AM
http://www.triedandtruewoodfinish.com/  The original wood finish is made of linseed oil and beeswax. I apply a coat every other day until I'm satisfied. Then when it's dry, I apply a paste wax over it. Very nice! I've seen it stay soft longer when applying over an existing finish. On stained wood it works very well.
Gandalf
Monday, February 7, 2005 9:51:00 AM
Tim;

Took a look at that page. That product sounds really nice. I used to mix my own finishes using linseed, turps, Jap drier and beeswax. This product sounds like it would save a lot of hassle and give the same effect.

FYI to anyone interested: The key with hand rubbed finishes is patience, economy of amount used, and getting a 'feel' for the oil as it sets and gets ready for rubbing. It's not difficult, and when its right,its a thing of beauty - you just can't rush it. Its a far cry from Brush and Go topcoats, as you really have to make sure you wait properly between coats, but it enhances the wood, rather than mask it.

To achieve a super soft velvet like finish, you can apply the first coat with 600 grit emery paper, working with the grain - known as oil sanding. Don't know if the product Tim mentioned would work this way, but I would assume so.

xrundog
Monday, February 7, 2005 12:11:00 PM
usahog
Monday, February 7, 2005 12:43:00 PM
Nice work Xrun!!!!

as I was saying before.. on the sealing the finish... I've found the water based poly "pacific Strong" to be the best sealer without any residue or odor after the fact...

that finish that you posted above does look like a good one Xrun... takes the guess work out of the mixes LOL...

I'm like Gand on the mixing and oil sanding/wet sanding the wood as you apply your finish... BLO is one type of finishing mix I've used... which basically sounds like that you use in one can??

Hog

xrundog
Monday, February 7, 2005 12:53:00 PM
"which basically sounds like that you use in one can??"

Right! It's touted as an "all natural" finish. I put it on with my hand. Thin coats. I've been using a small can for about the last dozen projects. Soap and water clean up. Smells good too!

usahog
Monday, February 7, 2005 1:12:00 PM
I'll have to give that a shot on one of my projects...

Thanks Xrun!!!

Hog

Gandalf
Monday, February 7, 2005 2:01:00 PM
Took a peek at those pictures - beautiful work Tim, the walnut really came to life with that finish. Now, thats what I'm talkin' about. Very nice.

Hog, how is the clarity on the new water based top coats. I haven't worked with any of the latest products, and always stayed away from them because I found them to have a 'milky' effect when viewed obliquely.

Man, we've jacked the hell out of this thread, haven't we..........

BornADuck
Monday, February 7, 2005 2:06:00 PM
You're doin' just fine...totally within subject

and those boxes are works of art man.

usahog
Monday, February 7, 2005 2:23:00 PM
"Hog, how is the clarity on the new water based top coats. I haven't worked with any of the latest products, and always stayed away from them because I found them to have a 'milky' effect when viewed obliquely."

I've found the opposite with this stuff... I've used water based from Mini Wax, and others and know what you mean with the milky or yellowish tint it throw off after drying... this "Pacific Strong" product is great for not doing that... and I also like the quick drying it does... I can apply 3 coats with elbowing in 000 steel wool in between in about an hour...

the only pictures I have of using it "finished product" are flag cases... and many of those I left natural wood without stains added.. accept for the oak with a miniwax "Golden Oak" stain... this was also the same finish on the shelves and trays I did awhile back... I'll pop those pictures up on the pic board...

Hog

usahog
Monday, February 7, 2005 2:36:00 PM
well scratch that one... I did a search and couldn't locate the pics...

I'll post a couple up for tomorrow!!!

Hog