iwolf
  • iwolf
  • Aficionado Topic Starter
Monday, March 14, 2005 7:56:00 AM
can anyone tell me the name of the cem in used to make the 50/50 humi charger????
BLISTER
Monday, March 14, 2005 8:01:00 AM
Man, I had to go to the depths of my crytic solutions manual to decipher that one.

I think the answer you seek is PROPYLENE GLYCHOL

Mo'sMan
Monday, March 14, 2005 8:09:00 AM
need some?
iwolf
  • iwolf
  • Aficionado Topic Starter
Monday, March 14, 2005 8:22:00 AM
yes i sure do Mo's i cant seem to find anything like it here in logan
andytv
Monday, March 14, 2005 9:25:00 AM
wolf,

shoot me an email

andyt at msicorporation dot com

crptman
Monday, March 14, 2005 9:31:00 AM
You can get PG at your local pharmacy. I did, and mixed it 50/50 with distilled water.
Mo'sMan
Monday, March 14, 2005 9:38:00 AM
make sure you measure it by weight

i got mine at a local veterinarian supply store

John hay Cigars
Monday, March 14, 2005 10:02:00 AM
Blister, you are good. Judging by the time you posted, you found that in a record time of under 5 minutes. Depending of course when you read it. Could have been 5 seconds. LOL, you are tough.
iwolf
  • iwolf
  • Aficionado Topic Starter
Monday, March 14, 2005 10:20:00 AM
thanx anyways andytv but mo's is gonna hook me up with some but again thanx

distresing
Monday, March 14, 2005 10:25:00 AM
The pharmacy wanted $15 for a pint. The feed store charged $18 for a gallon.
Slimboli
Monday, March 14, 2005 10:40:00 AM
Remember guys ...

... it a 50/50 percent solution by WEIGHT ... not by volume.

Believe it or not, it does makes a difference ...

MACS
Monday, March 14, 2005 11:23:00 AM
Distilled water.

Climmax media, 65%.

Set it and forget it.

jcwbnimble
Monday, March 14, 2005 11:57:00 AM
Howdy,

I live in the greater Los Angeles area, and there isn't a single pharmacist that knows what the heck Propelyne Glycol is. I kid you not.

I have been to 20 different pharmacies and none of the people working there have ever heard of it. Anyone in the L.A. area know where to get this stuff?

Thanks,

Scott.

03screw
Monday, March 14, 2005 12:49:00 PM
Not being a smart ass jc but, just get the 50/50 mix from CI's website and you get 2 8oz bottles for $11.00. That way you don't have to worry about wieghing and measuring.
Mo'sMan
Monday, March 14, 2005 1:14:00 PM
I made two gallons for less than $15.
BLISTER
Monday, March 14, 2005 1:22:00 PM
It's sometimes difficult to buy PG because it is essentially anti-freeze. It's in the same chemical family as ethylene glycol which is the stuff you put in your radiator. The compound is toxic to the liver. I'm sure most manufacturers sell it in vast quantities for production of cosmetics and coolant uses. There's probably very little profit (and some legal risk) to be made selling to consumers in small batches.

By the Slim, the density of PG is 1.038 in relation to water. It would be tough to distinguish its mass from water without a really accurate scaled devise. I would probably just mix it 50/50.

crptman
Monday, March 14, 2005 1:40:00 PM
Screw all the chemicals. If your humidor is large, buy an Oasis Plus humidification unit, plug it in, and forget adding anything but occasional distilled water. It keeps your humidor at a constant RH of your choosing.
andytv
Monday, March 14, 2005 1:48:00 PM
BLISTER,

I agree w/ the weight/volume thing.

I measure by weight, and I can't really tell the difference in the volumetric results on my oz scale, besides, humidors arent closed systems, once some water evaporates and is lost, you lose your mixture anyways. BTW, I purchased it by the gallon from a chemical supply company ($20 shipped)

I use Climmax in my humidor. As soon as I can get ahold of a pound, I'll use it in my sweaterador too.

Slimboli
Monday, March 14, 2005 2:57:00 PM
Almost right, BLISTER ... close can mean a world of difference when it come to chemicals, as you probably know.

Polypropylene glycol is not antifreeze, but used in antifreeze as a de-icing solution, and is a family of long chain polymers attached to a glycerine backbone.

PPG is used as a thickener in many products, and is even used in toothpaste to prevent bacteria from breaking down the pyrophosphates used to control tartar buildup.

Propylene Glycol is generally recognized as safe (GRAS) by the US FDA for use in foods and pharmaceuticals, when manufactured and used in accordance with FDA requirements.

Some typical uses of Propylene Glycol USP include: pharmaceuticals, foods, cosmetics, tobacco, flavors & fragrances, personal care, and animal feed.

Functions of Propylene Glycol include:

- excellent solvent in flavor/fragrance and pharmaceutical applications

- exhibits high humectant values and helps retain moisture in certain products

- odorless and colorless

- completely water soluble

- soluble in other organic materials (fatty acids, alcohols, ketones, and esters)

- nutritional value of Propylene Glycol USP is 570 kCals per 100 grams

... funny how they don't mention humidifiers ... LOL!

BLISTER
Tuesday, March 15, 2005 5:34:00 AM
Actually Slim, you are almost right.

Propylene Glycol has a melting point of -60 C. and a boiling point of 187 C.

Ethylene Glycol has a melting point of -13 C amd a boiling point of 196 C.

I would say that Propylene Glycol is a better antifreeze than Ehylene Glycol.

You are right about all of the manufacturing uses for PG, but I believe it is used because it is cheap not because it is safe.

In the lab, PG is classified as a skin irritant, yet it is used widely in cosmetics.

It's a good thing PG's chemical compound is stable. The molecular compound is C3H8O2.

If you change the hydrogen oxide string to C3H60 you get Propylene Oxide which is extemely flammable,explosive, and a known carcinogen. Oh by the way it also alters the DNA string and impairs fertility.

Man, where's Cigar Primate when I need him?