andytv
  • andytv
  • Herf-A-Holic Topic Starter
Tuesday, August 2, 2005 6:35:00 AM
grishuha
Tuesday, August 2, 2005 7:08:00 AM
They don't seem to be reviewing any V cutters 😞
SteveR@CigarBid
Tuesday, August 2, 2005 7:55:00 AM
Good'ole Xikar. I love my Xikar.
TBWCW
Tuesday, August 2, 2005 7:55:00 AM
I really need to buy a Xikar...
teedubbya
Tuesday, August 2, 2005 7:58:00 AM
I love my Xikar and my colibri, but that seems to stir up the Palio lovers and colibri haters 🙂

If I am not mistaken (and I most often am) Xikar originated right here in KC and one of the B & Ms frequent is a (the?) major distributor.

barryneedleman
Tuesday, August 2, 2005 7:59:00 AM
I have used may cutters over the years and the best (by far) is the Palio cutter that Slim gifted me. This cutter consistantly cuts perfectly.
MACS
Tuesday, August 2, 2005 8:01:00 AM
They got 'em here. I got me one and I like it.
StogeeBoy
Tuesday, August 2, 2005 8:10:00 AM
I miss my palio 😞
SteveR@CigarBid
Tuesday, August 2, 2005 8:23:00 AM
Never tried a Palio, although I've always wanted to.
bassdude
Tuesday, August 2, 2005 8:51:00 AM
I used my Palio 12 times before it was a memory. Excellent cutter - by back-up now primary is a Xikar.
andytv
  • andytv
  • Herf-A-Holic Topic Starter
Tuesday, August 2, 2005 9:25:00 AM
I've been studying on getting me a Xikar.

Is there any functional differecne between the xi1,2,3 lines?

puffdaddy63
Tuesday, August 2, 2005 9:26:00 AM
Love my Xikar! ANd they have fantastic customer service...on a par with CBid customer service!

Mark

jcwbnimble
Tuesday, August 2, 2005 9:33:00 AM
I haven't noticed any functional difference, with the different models of xikars I have used.

Compared to most of the cheap double bladed cutters out there, a xikar will cut circles around them.

If you get lucky you can find some bundled deals, like the xikar cutter with some cigars. I got my xikar with 4 cohiba robustos for $40. The cigars cost more than that at my local B&M, so I looked at it as getting a free xikar cutter.

Do a google and see what you come up with.

jcwbnimble.

SteveR@CigarBid
Tuesday, August 2, 2005 10:02:00 AM
There is a difference in the steel, I believe. The grades go up slightly with the more expensive models. Also, the frames (grips) are made of different materials. But, they all function the same and deliver a nice cut.
jcwbnimble
Tuesday, August 2, 2005 10:21:00 AM
Xikar actually has a cutter and knife combo that have fossilized Wooly mammoth tusk accents. If you have $600 to spare, the set is yours.

I believe they all have the same C rating of 55. I checked the Xikar website, but they only give a rating for the Xi2 cutters. Since those are the cheapest and it says the C rating of these are the hardest in the industry, we can hypothesize that all the blades are the same hardness.

The major difference is the materials used for the cases. Just do a google on xikar, and you'll get the homepage for the company.

Any way you cut it, you can't go wrong with a xikar.

jcwbnimble.

jrdacd
Tuesday, August 2, 2005 10:34:00 AM
I definetely agree on the Xikar cutters. I had a little problem with mine- sent it back to them and 5 days later had a new replacement. I even got an e-mail from their customer service dept. informing me they received the cutter.

Great service + great merchandise=repeat business

Just ask Cbid.

later, jd

tailgater
Wednesday, August 3, 2005 5:22:00 AM
Wenger Swiss Army Knife with Cigar Cutter.

Top notch cut.

And since it's a functional pocket knife, I ALWAYS have it with me.

The thing with the other cutters is that I would keep it with my humidor and take it out when smoking with friends at home, but I wouldn't always carry it with me. A cutter is only good if you actually have it to use.

andytv
  • andytv
  • Herf-A-Holic Topic Starter
Wednesday, August 3, 2005 5:49:00 AM
tailgater......you have my attention.

I love Swiss army knifes (although I am a "victorinox man").

Do you have the "luxury tool" or the golf one. I read that the CBid uses this as their shop cutter.

Is it small enough and does it have a loop to fit on a key ring??

MACS
Wednesday, August 3, 2005 6:07:00 AM
echo4alpha has a Palio cutter that i've used. While the ergonomical design is nice... I noticed he usually carries his Xikar.

Not trying to speak for the man, just making an observation.

Slimboli
Wednesday, August 3, 2005 8:08:00 AM
Wow ... thanks for finding that article, andytv. I posted is several years ago here on the forums, but forgot all about it.

Here's another more recent article on cutters ...

Up In Smoke - Column No. 2

July 22, 2004

Cigar Weekly member and columnist Jason Rhine (Rhino) discusses cutter, punchers, piercers and blades.

--------------------------------------------------------------------------------

All Things Sharp?

Cutters, punches, piercers, blades.

Sounds like something a guy hawking his cutlery services in the Bronx would say. But what I'm talking about is the variety of ways you can open your cigar for smoking, otherwise known as cutting. Some people bite them, but I won't discuss them for fear of reprisals against cigar smokers at large. Some slice the caps off with the hands of a surgeon. Others use a device designed for drilling little holes into the cap to provide the flow, or a larger bore that will remove a single, large hole out of the cap.

Which is for you? That all depends on what you like. Do you like the feel of a large hole to pull smoke through? A single avenue of escape that keeps that lovely cap of your cigar mostly intact? Do you like the idea of cutting your way through that same cap for an even larger opening into the cigars interior? How about placing two or three small holes to concentrate the smoke before hitting your palate?

Once you've decided on a method, you must decide on a cutting device. First you have the cigar cutter or cigar scissors. The idea is to cut in front of the last layer of the cap in order to hold the cigar head together but still provide a large drawing area. There are documents that can actually detail the type of cut you should use depending on the shape or size of a particular cigar, but I won't go into that much detail. However, the most common is a perpendicular cut to the cigar cap. If you are curious to know more, there are some interesting articles on the web.

Back to the cutterthey come as single or double bladed, a V-cut device, or a pair of cigar scissors. Make a cut perpendicular to the body of the cigar, roughly about 1/8" or 3mm behind the final cap layer of your cigar. This can be done to varying degrees, but if you go over that last cap line, you risk damaging the wrapper and binder. A V-cutter will remove the cap in a strip, like a trench across the top of your cigar. It is pretty simple to use, but if done improperly can cause serious damage to the cigar.

Next there's the Cigar Punch. This device will remove a portion of the cap like a glass cutter can pop out a hole in a pane of glass. Turn it and pop out the divot. This is a very easy method of cutting a cigar as it removes the guesswork out of the traditional cigar cutter. To use this device just push into the cap in the same direction as the cigar. Do not go too deep with your punch, just remove part of the cap. This method will concentrate the smoke on the palate for a more enjoyable sensation.

The cigar Piercer is not as well known as the draw poker. A draw poker is designed to work like a drill, removing material along the axis and loosening a tight draw on a cigar. The cigar Piercer works the same way, although at only 1-1/2" to 2" long it is designed to only reach past the cap. To use this device you must know how many holes you want in the cap and then practice angling the rod so there is a meet-me area right past the cap. Angle each hole toward the center of the cigar to make sure you get the smoke in the meet-me area before it travels out each hole onto your palate. A perk of this method is that the cap is almost entirely intact and the smoke is concentrated on two or three areas of your palate.

All in all, there is a cutting method for everyone. I have tried all of these methods, have my preferences and my favorite tools for the task, but I'll leave it up to you to decide what you like. There are multiple manufacturers of these types of tools Zino, Palio, Swiss Army, Xikar and most have websites.

But as the credo in this hobby, to each their own.