porter2174
Monday, August 29, 2005 4:24:00 AM
I currently have the 65% climax beads in my humidor. It is a 150 count humidor, the presidente if any of you are familiar with it. My digital hygrometer has not gotten above 63 since I have had them in there, I have them in two different shot glasses. I feel also that the cigars are a little dry for my taste. I was wondering if I could purchase the beads in 70% and use a little of both in my humidor, would that be ok or should I stick with one or the other? Your help is much appreciated.
xrundog
Monday, August 29, 2005 5:18:00 AM
63% is a common reading. Your Hygrometer probably reads +/- 2. But if it seems too dry for you, try the 70%. You can certainly try mixing beads. Not sure what will happen, but it won't hurt anything. I'd guess that the 65% beads will become saturated and the RH will go to 70%. But I may be wrong. Give it a try.
KNOF
Monday, August 29, 2005 6:18:00 AM
I beleive the concept behind the different % of beads has to do with the technology and how the beads were built to release a certain percentage of moisture (65% verses 70%). Depending where you live will also create a natural amount of humidity, be it high or low. If you live in an area that is very dry and low humidity during summer months, then you should use higher percent beads during those months. The same goes to areas of high humidity, then you use lowere percent beads to help adjust your humidor.
Thom
Monday, August 29, 2005 7:40:00 AM
I had the same problem with low humidity using 65% beads. I just kept adding more beads then wait a day, check the RH, then add small amounts of water, wait a day, until I got to the 65% steadily.

I ended up using a small plastic former dip container (short but wide) to hold all the beads and it's about 3/4 full, for my 100 ct. humi.

grishuha
Monday, August 29, 2005 8:04:00 AM
First, do a salt test on the hygrometer!