tallhamm
Saturday, September 3, 2005 7:52:00 AM
I am trying to find Propylene Glycol to use in a homemade Coolador. I found a drugstore which has it in a solid, bead-like form. Can this be used somehow to make a humidifier? Any help would be appreciated. Thanks
PurpleSageRighter
Saturday, September 3, 2005 7:57:00 AM
Try using the search function on these boards.

Q's abt prop glycol have been axed n answered many times.

Purp

RICKAMAVEN
Saturday, September 3, 2005 10:32:00 AM
tallhamm

your drugstore or any drugstore can order a pint of PG for about $10.00 or less. cut it in half with distilled water form any grocery store for a bit more then $1.00.

i pint pg, i pint distilled water. keep the leftover sealed so the water doesn't evaporate, and you are good to go.

RICKAMAVEN
Saturday, September 3, 2005 10:34:00 AM
in case you don't know, green oaises can be purchased at any craft store. it's the one that soaks up liquid.

i never cover my home made humidifiers.

if you need any more info

[email protected]

puskarich
Saturday, September 3, 2005 2:34:00 PM
You can get PG at Wal-Mart.
sw48362
Saturday, September 3, 2005 7:44:00 PM
look at the RV stuff for drinking water line anti freeze 2.00 a gallon. Same stuff with a little dye. for color
tallhamm
Thursday, September 8, 2005 5:59:00 PM
Thanks to all for the good advice. I have all that items I need and am mixing and preparing my solution tonight. Again, Thanks!
Slimboli
Thursday, September 8, 2005 6:12:00 PM
Be careful that it is not ethylene glycol (which most antifreeze is made) ... as this is not the same as propolene glycol ...

... that stuff is deadly.

Ethylene Glycol or Propylene Glycol

Both ethylene and propylene glycol possess many characteristics that make them ideal for use in heat transfer systems where protection from freezing is required. Desirable properties include high boiling points, low freezing points, stability over a wide range of temperatures, and high specific heats and thermal conductivities. Furthermore, used with an appropriate inhibitor, glycols demonstrate a non-corrosivity that may substantially prolong system life.

Ethylene glycol based solutions work well in most anti-freeze applications because of their excellent heat transfer efficiency. The low viscosity of ethylene glycol allows systems to operate at lower minimum temperatures and is more energy efficient due to its reduced pumping requirements. The primary drawback to ethylene glycol is that it is listed as a "toxic chemical" under SARA, Title III, Section 313, due to its acute oral toxicity.

Inhibited propylene glycol should be used for freeze protection where direct contact with foodstuffs or incidental contact with drinking water may occur. Although propylene glycol is generally recognized as safe (GRAS) by the FDA, it is not intended for human consumption.

Slimboli
Thursday, September 8, 2005 6:20:00 PM
Also, what I forgot to mention, is while most RV plumbing antifreeze is a mixture of propylene glycol, alcohols and water ...

... it is also not mixed to the recommended 50/50 solution for humidifiers ... and the alcohol can't be all that good for your cigars, as it will tend to dry them out.

Play it smart, and use what is recommended.

sw48362
Thursday, September 8, 2005 6:20:00 PM
What slim said.
tuckersdad777
Thursday, September 8, 2005 6:21:00 PM
Dang! Slim knows big words!
Slimboli
Thursday, September 8, 2005 6:28:00 PM
Naw ... I just know how to 'copy and paste' ... 😉