iwolf
  • iwolf
  • Aficionado Topic Starter
Wednesday, September 14, 2005 7:08:00 PM
I am having trouble finding this wood, I live in a small town so I don't have alot of options. I read on another site that mahogany will work. Does anyone have any ideas

or opinions??

Also do they use spanish ceder for fencing or something like that I can use after some doctoring??

thanks in advance,

Buck

dr_evil
Wednesday, September 14, 2005 8:17:00 PM
I have seen spanish ceder lumber pieces auctioned on that big website that starts with the letter "E".
bassdude
Wednesday, September 14, 2005 8:20:00 PM
talk to USAhog.
gonesledn
Wednesday, September 14, 2005 9:47:00 PM
http://www.rockler.com/search_results.cfm?filter=spanish+cedar&submit.x=1&submit.y=11 

here is where i get the spanish cedar that i am doing my project with. they have a store a couple miles away from me. like a kid in a candy store walking in there...

hope it helps,

wes

BikerBob1961
Wednesday, September 14, 2005 9:53:00 PM
hefferwdy
Wednesday, September 14, 2005 10:27:00 PM
If you are just wanting it to line a humidor, just go to your local b&m and pick up some used boxes. My wife just picked up a new hobby of making cigar box purses.and she has been picking up dozen of boxes for chump change.
andytv
Thursday, September 15, 2005 2:31:00 AM
I've gotten several pieces from that auction site.
n811
Thursday, September 15, 2005 5:03:00 AM
Wall Lumber has 4/4 (1" thick) spanish cedar for $3.50 per board foot - but you have to buy 10 bf minimum.

http://www.walllumber.com/exo.asp 

I've completed several projects using this lumber, and it has worked well. It does bleed a bit, so be sure to store it in a warm place several months before using it. (I keep mine on the southern wall of my non-climate controlled shop).

Buckwheat
Thursday, September 15, 2005 5:33:00 AM
I may be incorrect but I believe that the dust from working with SC is pretty bad for you. Don't know anything else but I thought that I recalled reading this. You may want to look into it if you are planning on working with a lot of it.
ghe
  • ghe
  • Enthusiast
Thursday, September 15, 2005 7:13:00 AM
I, too, have read and heard about acceptable alternatives to Spanish cedar. But when you're willing to invest your time and energy into making a humidor, why take any chances? As pointed out in other messages, there are Web sources for Spanish cedar. Also, if you check with speciality woodworkers in your town -- cabinetmakers and the like -- you may also locate a source for Spanish cedar, even in a small town.
tsmith283
Thursday, September 15, 2005 7:47:00 AM
You can use mahogany, as well as several other types of "redwood" because they are rot and bug resistant, but mahogany is very expensive compared to spanish cedar. All redwoods have a chemical in them that gives them their color, smell, rot and bug resistance, and it is not healthy to breath in the dust from working with them--use a good dust mask. Also, the darker the wood the higher chemical content(mahogany is worse than cedar). MY TRICK...go to a local store and buy a couple cheap patio benches made from spanish cedar. I take them apart and re-saw/plane to 3/8" thickness. (one bench lines a few humidors)
iwolf
  • iwolf
  • Aficionado Topic Starter
Thursday, September 15, 2005 10:42:00 AM
Tsmith thats what I was thinking of doing, I wonder if the wood in cedar fencing is spanish????

jcwbnimble
Thursday, September 15, 2005 1:40:00 PM
Wood fencing is actually made from Red cedar and should not be used for humidors. Well, don't use it unless you want your cigars to taste like your fence:-)

vfrtwice
Friday, September 16, 2005 11:52:00 AM
Buck,

Where are your from. There is a place here in ohio that is the cheapest i have found.

Keim Lumber.

they will cut and mill anyting you need. Last time i check they were around 4.56 per board ft.

thats 1ft by 1ft by 1 inch!

they may ship small qyt if you are out of state. Its worth checking them out. I have an antique cabinte i am going to make a cabinet display humidor this winter.. and i went to them for lumber. They KICKED ROCKLERS ASS ON PRICE!!

http://www.keimlumber.com/ 

good luck

Keith

iwolf
  • iwolf
  • Aficionado Topic Starter
Monday, September 19, 2005 8:33:00 AM
Thanks VFR, That site doesnt look like they will ship all the way to utah so I guess I'll try one of the others.

Buck