Marty11201
Thursday, September 15, 2005 2:25:00 PM
I have a wooden, standup humidor. How do I prep it for use? I am kind of a rookie.
SteveS
Thursday, September 15, 2005 3:30:00 PM
put a small glass of water in the box, close the lid and leave it there for a week or two ... the water will evaporate and be absorbed into the wood ...

After that, wipe the interior with a soft cloth, put the humidification unit and hygrometer (if desired) into the box, then load it with cigars ...

JezterVA
Thursday, September 15, 2005 3:34:00 PM
It can actually take upwards of a couple of weeks to properly season a humidor prior to putting it to use. Most folks recommend placing whatever form of humidification device you are going to use inside the humi for a length of time and letting the humidity stabilize to a point of 65 or 70% relative humidity before placing your valuables inside. You can hasten the process to a point by simply lightly misting the interior walls of the humi with simple distilled water. Just make sure that you have stable RH prior to going "production". Hope that helps some.

Steve

JezterVA
Thursday, September 15, 2005 3:35:00 PM
HA!! SteveS beat me to the punch...
MACS
Thursday, September 15, 2005 4:31:00 PM
When I got my club chairside, I loaded it with cigars and put some humidity beads in it.

Next morning it was sitting at 65% RH.

Season, shmeason... put the cigars and humidity device in it and you're done.

John hay Cigars
Thursday, September 15, 2005 6:56:00 PM
MACS, You have been one post ahead of me for every thread for the last week on the Clubside. I back you up 100 %.
John hay Cigars
Thursday, September 15, 2005 6:57:00 PM
Club chair side that is.
Cappa
Thursday, September 15, 2005 9:35:00 PM
I let the humi get close to the rh I'm looking for then add cigars. I find it helps stabilize the humi quicker if it's full or at least part full.
SteveS
Sunday, September 18, 2005 6:16:00 PM
using only the OEM humidification device will take far longer to season the humi than to put a shot glass of water in it ...

You should avoid applying water directly to the wood ... wood and water are NOT friends and you could raise the grain by putting water directly on the wood ... oh, I know, any number of guys do that and we even had one of our fellow CBidders say that he poured a glass of water in his new humi, closed the lid and shook it up, then poured out the excess water ... which is all well and good unless you raise the grain which could then damage the wrappers of cigars stored in the unit ...

Not seasoning the unit leaves you open to dry cigars if the wood is dry enough that it will absorb moisture since it will take not only all the moisture your humidification devise has to offer, but moisture from the cigars as well ...

that said, it's YOUR humidor ... do with it as you wish

Sunday, September 18, 2005 7:35:00 PM
Too much moisture too soon can cause the wood to not only raise the grain but also lead to warpage which will destroy the humidor that you are trying to use to protect your cigars. I would definitely advise against force humidification of any kind. You want this humidor to last a long time, you can spare a couple of days to do it right. If you live in an area with high humidity, it will take less time. Up north in the winter it will take up to a week to stabilze.