TJtorpedo
Sunday, November 6, 2005 7:00:00 AM
My first post! I'm new to this site, but great info and cigar-talk....

A slight problem that some of you more experienced humidor owners can possibly help with....I've owned a 200-count humidor for approximately five months. I went through the recommended seasoning procedure, and I'm having problems with regulating the humidity. It seems to always be too humid, at which point I find myself "airing out" the humidor for a couple of hours about once a week to try to get the humidity down. The humidor uses two of those rectangular humidification devices, and I always use distilled water. I do live in Florida, so it is humid down here by nature, and to try to keep the temp at a constant 70 degrees is a joke. I've noticed products such as the "humicare" crystals and 50/50 solution.

Any ideas???

andytv
Sunday, November 6, 2005 7:04:00 AM
Without getting into a lot of details;

Gut the green stuff out of your humidifiers and replace it with 65% beads (conservagel, heartfelt, etc).

OR

you can fool with 50/50 solution, but I said "screw it" a long time ago. Beads work too good.

You obviously need to REDUCE the humidity in your box, so water ain't the answer.

burgess_b
Sunday, November 6, 2005 7:07:00 AM
i am new, so i do not know anything really, but 2 rectangle humidifiers for a 200 count seems excessive. even if it were not, i would take 1 out. you have too much humidity, which means too much water. 2-1=perfect.

i would do that till a smarter guy comes on and says otherwise. i am not an FOG, but i am a chemist. my formula is good.

burgess_b
Sunday, November 6, 2005 7:10:00 AM
ahem (throat clearing noise), when i said a smarter brother, i meant andy. he is right, but i do not have the beads. until you get them, maybe do what i advised.
Sfraun04
Sunday, November 6, 2005 7:17:00 AM
TJ

Welcome aboard!

Andy nailed it by saying to look into humidification beads, but if that is not an option for any reason let's try to work with what you've got.

With the humidity being as high as it already is in Florida, you are not going to need 2 humidifiers. As burgess suggested, only use one. If you are still finding that your humidity is remaining high, it may work out better for you to crack the lid on your humidor open slightly.

I would also advise that you work to keep your humidor's temperature low. Don't want to chance those beetles coming to haunt your stash.

Stefan

TJtorpedo
Sunday, November 6, 2005 7:25:00 AM
Done! One humidifier out, and one in. Those beads sound pretty good. I'll have to keep an eye out for them....

Thanks guys! Appreciate it!

andytv
Sunday, November 6, 2005 7:34:00 AM
if the RH in the room is higher than 70%, you'll wanna take them BOTH out.
burgess_b
Sunday, November 6, 2005 7:42:00 AM
see, tj...if you ask it, they will come. 2 brilliant brothers and me. i had no idea about that last one. andy=1 smart kid.
smokedog7
Sunday, November 6, 2005 2:45:00 PM
Beads, beads, beads. I finially ordered some friday and can't wait to get that foam out of their.

I did the same as you, got a 350ct. humi and was using both of the foam ones that came with it. Like b said one should do ya. Till ya get some beads. Even with one in there, i still had promblems with getting the humidity stable. That 50/50 soulution seems to maintain a pretty stable level(mine's holding at 68% since i quite using distilled water.)

smokedog7
Sunday, November 6, 2005 2:46:00 PM
Beads, beads, beads. I finially ordered some friday and can't wait to get that foam out of there.

I did the same as you, got a 350ct. humi and was using both of the foam ones that came with it. Like b said one should do ya. Till ya get some beads. Even with one in there, i still had promblems with getting the humidity stable. That 50/50 soulution seems to maintain a pretty stable level(mine's holding at 68% since i quite using distilled water.)

Baron Porthos
Sunday, November 6, 2005 3:14:00 PM
I've heard if you use cedar from old boxes and heat them in a 200 degree oven for 5 minutes to dry them out, then let them cool, place them in your humidor it absorbs excess moisture
TJtorpedo
Sunday, November 6, 2005 3:22:00 PM
Well I'm sold....I just ordered some beads. Can't wait to get them so I can sleep at night knowing my new Graycliffs will be well protected!!
burgess_b
Sunday, November 6, 2005 4:01:00 PM
well, tj, until you get the beads, i could hold on to say 1 of those gracliff's for you--you know, just for safety. 😉
sketcha
Monday, November 7, 2005 8:03:00 AM
TJ,

HOLD ON!!!

1. First, are you sure your hygrometer is accurate? If not, read the "NEWBIES" thread to calibrate, or buy a good digital (Caiber II or II) Then retest.

2. Once you have a hygrometer that you are positive is accurate, we'll need to know what the average room humidity is. If it's below 70, then you're O.K. It sounds like it could be above. If you don't know, use your accurate hygrometer to test the room. Check it every couple of hours or so for a day or 2 and determine the average. A digital is great here because you can use the memory function to find determine the high and low points

3. If it is above, then remove the foam from BOTH of your humidifiers and replace it with 65% Climmax beads. DO NOT ADD WATER! The beads will work to get your humi down to 65% by absorbing moisture in the air. When they become saturated (translucent instead of white), take the humidifiers out and hit 'em with a hair dryer 'til they're dry (white again.)

Even if after you find it was a hygrometer problem and your humidity is fine, I would still recommend beads in BOTH humidifiers. The # of humidifiers is not the problem, it's the added water shooting you in the foot (again if your hygrometer is accurate.) In fact, there really is no limit to the amount of beads in a humidor. The more the better. Less maintenance. It's just a matter of space. Trust me, though, once you go beads, you'll never go back.

Keep us posted.

sketcha
Monday, November 7, 2005 8:06:00 AM
Correction:

(Caliber II or "III")

KNOF
Monday, November 7, 2005 11:05:00 AM
Threadjack - ON

Sketcha!!!

Where the heck have you been hiding? How is Oregon treating you and the family? Shoot me an e-mail Kendall at you know where. (knof7393 at yahoo dot com)

Threadjack - OFF

Sfraun04
Monday, November 7, 2005 12:08:00 PM
I thought my eyes were deceiving me when I saw sketcha posting. Nice to see you back! How you doing?!

Stefan

cjcinhi
Monday, November 7, 2005 2:21:00 PM
another question for this group...I bid on and won a 300 cigar humidor from CBID a few months ago. It is waiting for me in Oregon once I retire in January and just last week I bid on and won the Cigar Oasis Electronic Humidifier. Does anyone here have experience with one of these humidifier's wrt initial humidification and maintenance?

Thanks.

CJC

puskarich
Monday, November 7, 2005 2:27:00 PM
Another tip to lower humidity...add a small bag of rice to the humidor.
sketcha
Monday, November 7, 2005 6:08:00 PM
puskarich is right, but that's best for a temporary, emergency fix. Rice will require constant maintenance vs. beads that require so little.

cjcinhi,

I got one for Christmas last year. They just plain rule. Even better than beads, but beads are great when you have enough.

My tupper has the Oasis while the rest of my humis including my cooler have Climmax. My desktops require weekly monitoring as the humidifiers aren't large enough. My tupper with the Oasis almost none. I check it and dip into it periodically, but it's always right where I want it.

The cooler has a good portion, maybe a pound or so of beads (group purchase with SteveS, thanks for clueing me in, buddy)and requires maybe a hair more maintenance than the Oasis. Now I'm talking 6 mos. vs. 7 or so of near perfect humidity with no effort whatsoever on my part! Now I open them up occasionally to give them some air, of course, but that's it. O.K. and to pull some of my babies into the desktop rotation, but that's it, I swear.

The only other minor difference is that the beads roll off of their peak slowly whereas I can set the Oasis for whatever I want and it will remain there for the duration of the water supply. The beads I start out at 70 and recharge when the hit 65. There are no ISOMs in there so I'm not worried about 70. And this is mostly long term storage so it doesn't hurt to run a little on the high side.

One trick I learned is to recharge the tank at least once with distilled water before spending the 15 bucks on a new one. They claim that a bad idea as their chemical (prolly just PG) keeps the sponge from molding. Well mine looks great so far and I just recharged it for the 2nd time (lots of extra lid opening.)

So what part of Oregon?

Sfraun04,

Nice to be back, thanks. Been busy as Hell. Still am, but, I just couldn't stay away.

Keith,

I've been around for a little bit, lately. You just haven't been paying attention. I'll shoot you an email.

Sketch