jetblasted
Wednesday, January 18, 2006 6:26:00 AM
Last Chrismas, we had a small silver Christmas Ornament fall from the mantle decoration and break. The dust/paint inside the spread out across the hearth and stained it. I was under the impression that our hearth was slate, as it looks and feels like slate. But with all the shortcuts of todays home building industry, I'm not sure what type of material it is. As you can see from the picture, the stain pretty bad. Thinking it was slate, I grabbed a bottle of spray cleaner to clean up the mess and it only made it much worse.

Does anyone have any idea what this material is and how do I clean this spot ?

Thanks in Advance . . . 613840.jpg

ryantp
Wednesday, January 18, 2006 6:32:00 AM
Have you tried something as simple as a brush and warm, soapy water? Might work without ruining whatever material that is.

Also, a lyme cleaner might be a good shot.

EI
  • EI
  • Herf-A-Holic
Wednesday, January 18, 2006 7:18:00 AM
Looks like a job for Ruggy
EI
  • EI
  • Herf-A-Holic
Wednesday, January 18, 2006 7:20:00 AM
if it was paint... maybe some of that oops or goof or what ever they call that latex paint remover might work
Charlie
Wednesday, January 18, 2006 7:21:00 AM
slate will stain, it is pourous!

Charlie

Charlie
Wednesday, January 18, 2006 7:22:00 AM
whatever you try, make sure you only use it on a small area to test, or you could come out with a worse mess!

Charlie

Cparker
Wednesday, January 18, 2006 7:45:00 AM
Following Charlies advice to test on a small area, you migh try one of those effervescent denture cleaners.

Since it looks like slate, and is pourous, the bubbling may help lift the stain.

Cparker

tailgater
Wednesday, January 18, 2006 7:45:00 AM
Martha Stewart would know.

I think her prison floor was slate.

puffdaddy63
Wednesday, January 18, 2006 7:59:00 AM
or warm water and white vinegar...use it on marble and all kinds of flooring.

Mark

rugrunner
Wednesday, January 18, 2006 8:29:00 AM
Jet, get your self some muratic (sp?) acid.

Should be able to find it at a hardware store. While there pick up some heavy rubber gloves and a sponge.

Mix it 10 to 1 (or weaker) with water. apply mixture to the stain with the sponge. rub a bit. If it works some or not at all try agian after drying with a stronger blend. You don't ever want to get stronger the 4 to 1 or so. Muratic acid is some mean stuff. Don't get it on anything but the slate, gloves and sponge. Don't breath it either.

The idea is to get the watered down acid onto the stain. It will eat the stain and the tile (this is why you water it down). You want the surface wet, but not too wet(no standing pudles). The idea is that the weakened acid breaks down the stain and as it drys evaporates with the stain. It's not about scubbing the stain out, the acid does the work. A small fan blowing will help with the drying. I would try this and if it doesn't work and doesn't damage the hearth (shouldn't if it's slate as it appears to be, but I can't know from a pic)try increasing the strengh of the mix.

Be careful and ease into it. small area to test etc.

We use Muratic acid to clean the grout haze off tile after grouting on big jobs. I have mopped down a 3000 Sq foot comercial kitchen with this stuff with out a mask and had no problems. Just treat it like really strong bleach and you'll be fine. Any questions Rugrunner hotmail com

sw48362
Wednesday, January 18, 2006 8:33:00 AM
pour some beef gravy on it. Get a dog. Stain gone.
Ram27
Wednesday, January 18, 2006 8:33:00 AM
jet, try these links:

http://doityourself.com/clean/latexpaint.htm 

www.stonetechnologiesinc.com

Caution,( sorry Mark ) mild acid in vinegar will damage marble.

Stickbuild
Wednesday, January 18, 2006 8:42:00 AM
Was your slate treated with a sealer when it was installed? If so some manufactures recomend a cleaner that goes with the sealer.

joey6691
Wednesday, January 18, 2006 9:00:00 AM
i would try an acid wash ..
jetblasted
Wednesday, January 18, 2006 1:57:00 PM
Thanks for the info guys . . . I'll let you know how it turns out . . .