rver
  • rver
  • Enthusiast Topic Starter
Sunday, February 5, 2006 3:26:00 PM
I've a humidifier that I'd like to attach to the top of my humidor. I'm wondering what kinds of adhesive would work well without releasing odors that might affect the cigars.
TrannyMk
Sunday, February 5, 2006 3:29:00 PM
Many use the Magnetic stickers and a metal plate. Some use the valcro strips. I bet the valcro is the simplest way to go.
rver
  • rver
  • Enthusiast Topic Starter
Sunday, February 5, 2006 3:31:00 PM
Thanks Tranny, where can I find the magnetic?
ARN
  • ARN
  • Herf-A-Holic
Sunday, February 5, 2006 3:38:00 PM
Most office supply stores carry either. I use velcro it seems to work well and has been on there for about 5 years. It makes it easy to remove when you recharge the humi...
TrannyMk
Sunday, February 5, 2006 3:39:00 PM
To be honest I dont know. I just know that it's one of the ways it's done. I bet someone will tell you where to get what you need. The velcro can be purchased at any hardware store.
Steven Drummond
Sunday, February 5, 2006 3:58:00 PM
Use Velcro....... All the humidors I have the magnets were fine but the glue wouldn't hold the magnets to the humidifiers or the hygrometers and they always fell off.

sw48362
Sunday, February 5, 2006 5:31:00 PM
industrial Velcro nothing less
BikerBob1961
Sunday, February 5, 2006 8:43:00 PM
I've tried the velcro and for me it worked fine for awhile but as the wood got most the glue failed anyone know of a glue that will stick to 65% humid wood?
JHC
  • JHC
  • Herf-A-Holic
Monday, February 6, 2006 3:07:00 AM
I'm with TUC, I have had bad luck with the glue used on the magnets. The magnet works well but it pulls the glue loose. I use velcro. Sometimes I add a couple drops of a clear glue like liquid nails or clear silicone type of glue.
Slimboli
Monday, February 6, 2006 4:14:00 AM
Gorilla Tape (or glue) ...

http://www.gorillaglue.com/ 

The tape is not 'double-sided' but it can be folded back on itself to make a small loop.

Unbelievably strong ... and will stick to anything.

Ram27
Monday, February 6, 2006 8:27:00 AM
Good stuff .
rver
  • rver
  • Enthusiast Topic Starter
Monday, February 6, 2006 4:46:00 PM
You don't find a problem with the odor from Gorilla glue or industrial strength velcro?
Slimboli
Tuesday, February 7, 2006 2:10:00 AM
Nope ... it goes away quickly enough.
Slimboli
Tuesday, February 7, 2006 3:43:00 AM
... and also, it's such a small amount it's nothing to really concern yourself with ...
rver
  • rver
  • Enthusiast Topic Starter
Tuesday, February 7, 2006 4:21:00 PM
Thanks. I've purchased and set up the humidifier and hygrometer. I'm giving it a couple of days and will check out how its working.

Appreciate everyone's comments. I really like my Adorini humidor and didn't want to take a chance on screwing anything up.

02hitler
Tuesday, February 7, 2006 4:54:00 PM
I used industrial strength velcro with industrial strength glue....the velcro is STRONG, but after a while I would open my humidor and find either my humidifier or hygrometer laying on my cigars (glue didn't stay stuck). So I purchased a few very, very small screws and screwed them into the inside of the lid of my humidor, through the velcro. And it worked! The screws are short enough that they don't penetrate the top of my humidor.
02hitler
Tuesday, February 7, 2006 4:58:00 PM
P.S. my humidor is a nice Reed & Barton. So don't let the screws may you squeemish.
rver
  • rver
  • Enthusiast Topic Starter
Wednesday, February 8, 2006 4:45:00 PM
I'll check out the Reed & Barton. I'm not familiar with them. Have you ever looked at the humidors on bid? Napolean and JFK?
porschesales225
Wednesday, February 8, 2006 5:16:00 PM
you have to sand where you going to put the velcro

HKGuns
Thursday, February 9, 2006 12:29:00 PM
I use magnets, however I replaced the cheap adhesive, that always gets worn out or falls off, with "outside rated" double sided Scotch brand tape. It comes with a red peel. Most hardware stores carry it. You'll find it hard to get this stuff off once you have it on where you want it.

Problems were solved after using this stuff.