u4ia
  • u4ia
  • Connoisseur Topic Starter
Monday, March 20, 2006 2:45:00 PM
i know from reading the posts that everyone seems to reccomend digitals, but if my analog has a calabrating (sp?) screw on it, will it still give a good reading after doing the salt test and adjusting to 75%? or should i just pick up another digital for the new humi? thanks for the help.
rver
Monday, March 20, 2006 3:21:00 PM
I'm not experienced but after having wierd results with a quality humidor I thought I would calibrate the digital hygrometer. I threw in an extra analog I had. The digital turned out to be -6%. So when I thought it was reading 64%, it was actually 70%. The analog turned out to be +2. My advice is to calibrate whichever one you have.
u4ia
  • u4ia
  • Connoisseur Topic Starter
Monday, March 20, 2006 4:21:00 PM
i have a digital in my current humi because the analog one it came with was way off and wouldnt calibrate, so i bought a digital and got some beads. the new humi i have has a much nicer front mounting analog with a calibration screw. i have beads in there too so i know i shouldnt worry so much, but i just want to make sure humidity is just right.
rodehog56
Monday, March 20, 2006 7:02:00 PM
TAKE THE ANALOG AND THROW IT OUT THE WINDOW AFTER SHASHING WITH A HAMMER!
n1cksdad
Tuesday, March 21, 2006 7:00:00 AM
I recently added a digital ( purchased at WM, Ka ching!) and it seems to be accurate while the analog in the same Humi registers almost 10 degrees lower.
rver
Tuesday, March 21, 2006 6:06:00 PM
Maybe so Rodehog, but the digital was way off as well. I'm not counting on it being digital or analog. Calibrating both and seeing which one is close. I think the idea of putting a sticky on with the +/- makes sense.