Here's what I did with my recently aquired humidor..

It only had the one tray, I added 3 more trays..

now looking for a piece of brass 2" W X 1 3/4" H to hold humi beads and set in the bottom between the two trays...

Hog

is this the humidor that i saud wasout of focus?

if it is, it looks a lot better, but it's still out of focus and smokey in that room.

are you still using that kodak brownie to take pictures.

Rick the camera I am using is out Cannon movie and picture camera.. bout $800.00 + bucks for it...

and I don't know whats going on with the focus chit??

but a $12.00 throw away camera probably could have done a better job??

Hog

hog, it looks like you used miter joints on the trays..corect? also do you use brads and or glue? if so on the glue what kind?

thx, chef rob

I used miters on these joints yes... Elmers carpenter glue (no odor) also on the joints.. with 18 guage 3/4" brads..

the tray bottoms are 1/8" thick and I ran a groove with tabelsaw all the way around to lock it into the bottom as I glued it all in...

Hog

thx! i was thinkin 'bout doin the same.

these were 5/16" thick and to do this again, I wouldn't miter them next time.. but box joint leaving an 1/8" flange to shoot the brad to along with the glue... this crossed my mind in the middle of cutting the miters on all them at one time... the 5/16" to work with miters was a PITA..

Hog

she's sitting at 68 degree's and 58% humidity on day 2..

Hog

^

For Blues and Betadog...

Hog