hoyodude
Wednesday, November 30, 2011 6:21:38 PM
Well, it's pretty grand to me anyway. After a lot of sweat, some blood and a few tears my studio is officially sanctioned by the city and the Fed as a business and Friday is my coming out party....so to speak. Every month the arts district in Rochester has a First Friday and, while I was open for a "meet and greet" last month, this time I'm ready to conduct business. I've been working with the new pulse-arc welder, getting pretty good already, and putting a few more peices together for my display case so things are up and running!

I'm crossing my fingers that the folks I met last month will be back, as they indicated, and between them and the rest of the huge crowd we are expecting this time (Christmas shopping and all) there will be some real business transacted. We'll see what happens....8-[

yardobeef
Wednesday, November 30, 2011 6:25:00 PM
Does your business have a website?
hoyodude
Wednesday, November 30, 2011 6:37:59 PM
Thanks for asking, at the moment all there is is a Facebook site:

http://www.facebook.com/pages/Rituals-in-Metal-Stone-Inc/277927815585018 

If you go there you can see what I've been up to.

wheelrite
Wednesday, November 30, 2011 6:45:33 PM
Congrats and best wishes !
jackconrad
Wednesday, November 30, 2011 6:50:07 PM
TUMBS UP
Wednesday, November 30, 2011 6:57:38 PM
👍 👍

=d> =d>

c3s

gimbel
Wednesday, November 30, 2011 7:00:32 PM
Do you work with platinum at all?
bloody spaniard
Wednesday, November 30, 2011 8:20:15 PM
I gave you both business AND personal "likes". Congrats, Hoyo. I hope you do well.
fishinguitarman
Wednesday, November 30, 2011 8:22:25 PM
=d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d> =d>
itsawaldo
Wednesday, November 30, 2011 9:01:05 PM
Shop looks great, best of luck with your new venture.

I didnt see and engraving vise check one out when you can for burnishing and bezel setting stones, I learned how to set stones with a vise and a hammer! Scared the crap out of me the first few times.

Havent been on the bench for 30 years, great work with a high satisfaction level.

Happy Selling!

hoyodude
Wednesday, November 30, 2011 10:37:25 PM
Thanks very much, all.

Uriah - yes, I've done quite a bit of platinum work in the past.

Chris - you know, I had an engravers block available to me over the past many years and have used it at times but with the GRS system my setting - bezel, channel, gypsy, etc. - is very stable and, to me, has been even easier to manipulate than when I used the block.

That aside, I have had my eyes open for a block just to have one for holding larger dimension pieces. In that regard I find them to be irreplaceable.

longerash
Wednesday, November 30, 2011 11:21:56 PM
liked and recommendation sent very good luck man
rfenst
Thursday, December 1, 2011 5:49:22 AM

I'm crossing my fingers that the folks I met last month will be back, as they indicated, and between them and the rest of the huge crowd we are expecting this time (Christmas shopping and all) there will be some real business transacted. We'll see what happens....8-[

hoyodude wrote:

Did you pass out business cards or small fliers indicating a decent percentage discount for new customers so that they would, perhaps have some incentive to hold off and wait for you to open up?

Or, something similar for a single use discount a percentage off any item purchased or repair made?

(I recently went back to a B&M whose Grand Opening Party was almost 10 years ago. the reason I went there is I still had their Grand Opening Coupon for 15% off. Sure, they looked at me a little funny, but were glad to honor it in exchange for my business...)

Your hard work and determination will make your new business successful!

hoyodude
Thursday, December 1, 2011 7:48:51 AM

Did you pass out business cards or small fliers indicating a decent percentage discount for new customers so that they would, perhaps have some incentive to hold off and wait for you to open up?

Or, something similar for a single use discount a percentage off any item purchased or repair made?

(I recently went back to a B&M whose Grand Opening Party was almost 10 years ago. the reason I went there is I still had their Grand Opening Coupon for 15% off. Sure, they looked at me a little funny, but were glad to honor it in exchange for my business...)

Your hard work and determination will make your new business successful!

rfenst wrote:

I hope you're right, Robert! I have to admit that, while it has been hard work and will continue to be, it's felt very gratifying...so far.

Thanks for the tips, also. I am about to do my little advertising blitz and I'll be incorporating ideas like these. I agree, that has many times been incentive for me to go into a new place and I know it works from running those kinds of specials in past businesses I've worked for. You have to give something away before you're going to get anything back - tried and true.

itsawaldo
Thursday, December 1, 2011 10:33:57 AM
Wow just read about the GRS, that looks like a great tool for that kind of work, would replace the block for sure for burnish and bezel setting.

I have been away so long I had no idea they had a tool like that.

Best of luck.

JuyceMan
Thursday, December 1, 2011 1:52:05 PM
Congatulations! Your shop is coming along nicely. I have checked out your FB page; are you considering a website (Etsy) where you can sell your wares? My wife has a blog and an Etsy account where she sells her artwork. Since I'm far from Rochester, it would be nice to have the option to view some possible purcahses online.
riverdog
Thursday, December 1, 2011 2:36:23 PM
Wow, gorgeous, gorgeous work!!!!!!!!!! You have every reason to be proud. Any online options for purchase in the future?
gimbel
Thursday, December 1, 2011 6:58:42 PM

Thanks very much, all.

Uriah - yes, I've done quite a bit of platinum work in the past.

hoyodude wrote:

I'll have to send you a photo of my wife's ring and see what you can do with it.

hoyodude
Thursday, December 1, 2011 7:28:05 PM
Thanks again, guys. As to my work being available online - it will be very soon. I had a simple Etsy site up awhile ago but I never put enough effort into it, only had a few pieces there, and I plan on doing a full-blown Etsy next week.

Stay tuned....

jimbud
Thursday, December 1, 2011 7:31:33 PM
Good luck, Hoyo. Sounds like you've approached it with a lot of thought. I have to check out your website.