frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Sunday, August 4, 2013 10:06:35 PM
don't want to spend the money for a front loader but like the low water required. Looking at top loader low water models without agitator allowing it to handle larger loads than same size agitator models too. Longer run time=a bit more electricity costs but my water bill is crazy now so I'd do that trade.

Considering a Whirpool WTW4900AW with 3.6 cubes but can't find/don't trust reviews. Very reasonable price (under $600 with delivery/install and removal of old machine) and not overly sophisticated selections which we like. I know the upside of this deal but I always consider a deal to be only as good as the downside. So far the only downside I have been able to uncover is some complaints about noise but that would not be a problem in my house. As for usage, just 3 adults here now, likely to go to 2 adults within the next year.

Any brothers or sisters out there with the info?

Much obliged.

Frank

dpnewell
Sunday, August 4, 2013 10:39:13 PM
Frank,

The Whirlpool 4900 (as well as most Whirlpools) is near the bottom of Consumer Report's ratings. We did extensive research on appliances for the new house. We're going with LG for everything.

Lowes has a 3.6 cubic foot LG front loader, and a 4.5 cubic foot LG top loader for $719, and if I'm not mistaken, that includes delivery and take away. Both are high efficiency Energy Star models. Home Depot may even have better deals on LG.

frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Sunday, August 4, 2013 10:45:31 PM

Frank,

The Whirlpool 4900 (as well as most Whirlpools) is near the bottom of Consumer Report's ratings. We did extensive research on appliances for the new house. We're going with LG for everything.

Lowes has a 3.6 cubic foot LG front loader, or a 4.5 cubic foot LG top loader for $719, and if I'm not mistaken, that includes delivery and take away. Both high efficiency Energy Star models. Home Depot may even have better deals on LG.

dpnewell wrote:

Good info. Something about Whirlpool was bothering me, that's why I didn't make the move yet.

Thanks.

TWhitcombe3
Sunday, August 4, 2013 10:45:38 PM
I had a repair man tell me that you cant go wrong with the old style machines, he said the biggest problem he always services with the new models isn't the mechanics but the cpu inside the component system... and always expensive. Just some input...

That being said my mother has a LG washer and dryer set for 3 years and has yet to have an issue with either, really nice machines.

frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Sunday, August 4, 2013 10:55:45 PM

I had a repair man tell me that you cant go wrong with the old style machines, he said the biggest problem he always services with the new models isn't the mechanics but the cpu inside the component system... and always expensive. Just some input...

That being said my mother has a LG washer and dryer set for 3 years and has yet to have an issue with either, really nice machines.

TWhitcombe3 wrote:

that's two votes...

Thanks

SMGBobbyScott
Sunday, August 4, 2013 11:00:57 PM
I generally recommend the Kenmore option if one is available...
frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Sunday, August 4, 2013 11:02:29 PM

I generally recommend the Kenmore option if one is available...

SMGBobbyScott wrote:

I hate Sears but I need a good machine...

dpnewell
Sunday, August 4, 2013 11:05:44 PM
Don't be afraid of Sumsung, either. Another highly rated line of appliances, though I personally like the LGs better.
frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Sunday, August 4, 2013 11:16:12 PM
glad I hesitated. My wife was ready to buy the Whirlpool. It seems that in recent years formerly reliable name brand appliance manufacturers have been bought out by others who were already taken over by still others...Amana is Maytag or somebody else, Frigidaire is Electrolux, maybe, ya can't tell the players without a scorecard.

Gonna sleep on this for a couple of nights. I'll get a wash board in the interim, can use it later if I start a jug band. Thanks to all for your help.

tailgater
Monday, August 5, 2013 9:16:11 AM
Does your wife check with her friends when you purchase a new table saw?
sd72
Monday, August 5, 2013 9:47:44 AM
Haha^
illinichaser
Monday, August 5, 2013 10:57:02 AM
+1 for the Samsung or the LG frontloader. Both make quality machines and some can be found at decent prices. Don't be afraid to look at a Sears appliance outlet as there can be some pretty good deals found on some where they got a little scratch(don't know about you, buy my laundry room is where no one ever sees it, a small scratch just means extra savings for me. . . )

I would avoid the High efficiency top loaders like the plague. I had a fisher-paykel(consumer reports loved these guys) that I threw away after 2 years,as I was tired of working on it. The high efficiency top loaders rely on recirculating water, which means a valve to switch between, recycle and drain. The ones I've seen are made of wax and can get messed up pretty easily.(just think of sand in the shorts after a day at the beach. . . )

JadeRose
Monday, August 5, 2013 11:37:15 AM
Whirlpool owns Maytag and Amana. Wanna see something horrifying? Go the the Maytag Facebook page and just start reading. I worked for Maytag when it was its own company and we built the best appliances in the world. I wouldn't own one now if you gave it to me.
JadeRose
Monday, August 5, 2013 11:38:30 AM
If you truly want a good washer.....find a 20 yr old Maytag in good shape.
bloody spaniard
Monday, August 5, 2013 11:44:35 AM

Whirlpool owns Maytag and Amana. Wanna see something horrifying? Go the the Maytag Facebook page and just start reading. I worked for Maytag when it was its own company and we built the best appliances in the world. I wouldn't own one now if you gave it to me.

JadeRose wrote:

What Jade said. We thought we were stepping up from GE but it was a nightmare. After just a few years (GE lasted over 12 yrs) replaced & bought LG front loaders with all sorts of features including steaming and haven't looked back since.

DrafterX
Monday, August 5, 2013 11:46:19 AM
I use a rock... 😞
Gene363
Monday, August 5, 2013 12:08:56 PM
Went from a Whirpool POS to an LG, much happier, both front loaders. Got a great deal at h.h. gregg by buying online and picking up in their local store.

Machines pretty much work the same inside, adding many/fancy cycles/controls is a waste of your money.

Whirpool = Kenmore used to be good stuff, not anymore.

One last caveat, non of them last like they used to last.

frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Monday, August 5, 2013 1:42:31 PM
things really have changed for the worse, I already knew and that's why I came here to the pros. We had a GE for 26 yearsmost of them when tehre were 3 kids here too, and now are replacing it's replacement after 11 years. It needs a timer which should not be the end of the world but I just know it's built to last 10 years and something else will go wrong soon enough. It's at the age when it will be good money after bad.

I appreciate the insight on top load HE as I really did not know much, and all the thumbs up for a couple of other brands that I will now sort through. I literally have a laundry list now (sorry).

Jade, I know you are right, but no way is a 20 year old machine gonna happen.

TG, as a matter of fact my wife does ask her friends before I buy a table saw...ok I'm a liar and you got me.

bloody spaniard
Monday, August 5, 2013 1:55:44 PM
GE's were the BEST for the money- a little occasional maintenance (lubrication and band replacement) is all they needed.
frankj1
  • frankj1
  • Herf-A-Holic Topic Starter
Monday, August 5, 2013 8:05:48 PM

GE's were the BEST for the money- a little occasional maintenance (lubrication and band replacement) is all they needed.

bloody spaniard wrote:

them days is over Blood. I recently posted about and got lucky about my quarter million dollar Thermadore stove problems. Turned out that the child proof had been accidentally set and nothing oven related would work, no parts required. But I learned that if I had needed a control panel, they are out of production...the stove is 10 years old! Thanks Thermapuke, make your product obsolete before I figure out how to use it!