nine999
  • nine999
  • Herf-A-Holic Topic Starter
Thursday, June 22, 2006 12:42:00 PM
is there a way to sharpen them once they start to get dull?

or am i being too cheap!(i am half chinese, you know)

nine

andytv
Thursday, June 22, 2006 12:43:00 PM
I imagine you could touch up the edge carefully with a stone.
SteveS
Thursday, June 22, 2006 12:56:00 PM
I just got my cutter back from Xikar after sending it in for service/sharpening ...

But if you're in a do-it-yourself mood, you might want to consider what a guy I know in Idaho does ... he sharpens his cutter using the chamfering tools used in reloading bullets.

andytv
Thursday, June 22, 2006 1:00:00 PM
^ that would only work with punch cutters that were very soft.

I used to use a shell casing as a punch......and would sharpen it in that manner.

emgjet
Thursday, June 22, 2006 1:57:00 PM
Palio cutters...guarenteed for life!
teedubbya
Thursday, June 22, 2006 2:22:00 PM
you mean cutters get dull?

Xikar fan here (had a crappy palio)

keitha13
Thursday, June 22, 2006 2:23:00 PM
Xikar(the only way to go)
nine999
  • nine999
  • Herf-A-Holic Topic Starter
Thursday, June 22, 2006 2:23:00 PM
...yeeeaaahhh..... chamfering tools.......uh huh....

ummm, yeah, i know what you're talking about....yeah...

not...

nine

scompay
Thursday, June 22, 2006 2:51:00 PM
Nine you can take them apart by unscrewing.

Then sharpen the blades individually on a 1000 grit stone (available at the oriental markets)

Thursday, June 22, 2006 3:42:00 PM
9 - what kind of cutter you have now?

C3S

scompay
Thursday, June 22, 2006 3:52:00 PM
xikar
scompay
Thursday, June 22, 2006 3:53:00 PM
did you mean nine?
Thursday, June 22, 2006 4:13:00 PM
Sorry Compay, i did mean 999 - but you are correct that you can unscrew the Xikar - great cutter - but i have difficulty cutting a large size ring gauge with it.

C3S

nine999
  • nine999
  • Herf-A-Holic Topic Starter
Thursday, June 22, 2006 6:58:00 PM
got a xicar- that ones still (very) good. i also have this twin blade translucent cutter and a a couple other twin blades. one of them seems to be getting a bit dull-still cuts good, just not as good as it used to. i like to use all of them to keep one from going too dull, but i would rather sharpen it if possible. if not- i can always bid on more-i know.

thanx for all the info guys...

nine

nine999
  • nine999
  • Herf-A-Holic Topic Starter
Thursday, June 22, 2006 7:00:00 PM
haha! i just won another translucent cutter!!!

just checked my email and BAM- how funny!

nine

( i'dd still like to sharpen the other cutter!!!)

dadz
Thursday, June 22, 2006 8:45:00 PM
Find a small slip stone, used to sharpen wood carving gouges. Only touch up the beveled surface, should leave the flat side alone.