usahog
  • usahog
  • Herf-A-Holic Topic Starter
Tuesday, August 8, 2006 10:17:00 AM
This one is Hard Maple.. I picked this wood because of the characteristics in it.. 20" x 11" x 9 3/4" I should be able to allow two full trays with 2 half trays..

Well Glue up is complete, now to get the Mrs. a sanding away on it... then I can add the profiles and cut the lid off and get it ready for the laser engraver... hopefully this one will be ready for the LOLH (Land Of Lincoln) Herf in October...

Hog811232.jpg

iqbal
Tuesday, August 8, 2006 10:51:00 AM
looks good, what joints are you using for the sides and top? also do you use your table saw to cut the top off and are you setting it at 2-3 inches?
odonndj
Tuesday, August 8, 2006 11:24:00 AM
Hog , Can I get details on the illinois herf .
usahog
  • usahog
  • Herf-A-Holic Topic Starter
Tuesday, August 8, 2006 1:27:00 PM
www.landoflincolnherf.com

October 7-8, 2006 Sherman, Illinois

Hog

usahog
  • usahog
  • Herf-A-Holic Topic Starter
Tuesday, August 8, 2006 1:28:00 PM
The city of Springfield will be non-smoking effective September, 2006. We have found a new location for the pre-herf and herf.

Both events will be held at the Sherman Athletic Club in Sherman IL. Sherman is approximately 10 minutes north of Springfield, close to I-55.

http://www.landoflincolnherf.com/thanks.htm 

Hog

Deriffe
Wednesday, August 9, 2006 3:44:00 AM
This work of art will be auctioned?

Folks, I've seen usahog's work up close and I guarentee this will be a thing of beauty.

myash07
Wednesday, August 9, 2006 7:22:00 AM
Sherman Il

Sherman?

usahog
  • usahog
  • Herf-A-Holic Topic Starter
Wednesday, August 9, 2006 12:32:00 PM
"This work of art will be auctioned?"

Deriffe, Yes it will be auctioned off at this years VI LOLH in October.. I've already contacted Kerry,Matt and Jody and shot them the pictures thus far...

Jimmy, Sherman went out of business a couple years back... I've got one of their old 30 count travel dor's that is fantastic... I don't think I'd want to carry this one around to much?? LOL

Hog

usahog
  • usahog
  • Herf-A-Holic Topic Starter
Tuesday, August 15, 2006 3:26:00 PM
"looks good, what joints are you using for the sides and top? also do you use your table saw to cut the top off and are you setting it at 2-3 inches?"

iqbal,

Sorry about the delayed reply.. I missed your post..

The Joints for this one are Shoulder/Lapped/Rabbet Joints.. for box construction this is one of the strongest.

Although there is a 45 degree Miter Lock Joint that is the strongest and made from a special router bit.. I have two of these bit's but my horizontal router table set up and jig is not completed where I can sufficiantly complete this construction type yet... soon though...

When the time comes for the lid to be cut off, I will cut it at 2" all the way around using my Table saw yes.. giving plenty of room with adding 3/8" Spanish Cedar inlay all around...

Hog