bs_kwaj
  • bs_kwaj
  • Herf-A-Holic Topic Starter
Saturday, October 7, 2006 9:54:00 PM
Well, I've received my Xikar just recently. It was good up until last night. I got home and pulled it out of my pocket and it fell apart. Literally!

I've been trying to put it back together, but I haven't yet figured out the V shaped spring clip's placement.

I think I know where it goes, but can't get it to stay while trying to slide it all back together.856538.JPG

grishuha
Sunday, October 8, 2006 5:20:00 AM
Put it in a bag and ship it to Xikar... they'll send you a new/fixed one.
andytv
Sunday, October 8, 2006 5:27:00 AM
Right......they will reassemble it or send a new one.

That being said, I am not overly impressed with Xikar.

I keep one in my desk at the office,but usually use my SAK or Palio (when I can locate it).

I got my Xikar in a trade some time back.......it was missing some of the plastic, but cut very well.

I sent it back and they sent me a new one; I noticed that brushed steel was used for the blades as opposed to the polished blades I had on the old one. It didn't seem as sharp....perhaps a different grade?

My advice is to buy the Wenger Swiss Army knife that has the cigar cutter.......the red one, not the "luxury" one (too bulky).

4merfib
Sunday, October 8, 2006 6:21:00 AM
I'm really suprised. I carry my xicar in my back pocket every day...for almost a year. No problems so far!

4

Charlie
Sunday, October 8, 2006 7:16:00 AM
Go to Xikar web site and order the free leather pouch for it, also send to Xikar or go to a B & M that sells a lot of Xikar and they will replace it for you!

Charlie

xibbumbero
Sunday, October 8, 2006 8:18:00 AM
The plastic handled Xikar's are a POS. Stick to the Xikar XI. X
Charlie
Sunday, October 8, 2006 8:32:00 AM
Andy

You sound like me....LOL, tell it like it is or how you feel!

Charlie

ajeroth
Sunday, October 8, 2006 9:34:00 AM
Well you could send it back in, but for you it would take a few weeks. I would suggest just putting it back together yourself. I pulled mine apart and figured it out. You'll need two screw drivers.

First take the two havles with the cutting blades and put them together. Then take the two screw halves and secure the blade portions together. I know, were jumping the gun becuase you aren't putting the black center piece on yet. We'll get to that.

What you see is the that there are little lips on the sides of the metal where the bent piece of metal goes.

Now slide the center platic piece onto the end but not all the way up. This will keep the two halves from trying to fly apart it seperate directions.

Now put the small metal piece with the hole in place and get the spring compressed in there to with the other end butting up against the bent metal piece. Should be right in the center. Keep it all together and slide the center plastic piece into place. Remove the screw again being careful to hold everything together. Put the screw in place. Screw in the center thumb screw and it's back together.

I suspect you don't have the free case and the srews just came loose in your pocket. Could have happened to anyone. I'll post a picture to show what I'm talking about.

ajeroth

sw48362
Sunday, October 8, 2006 10:44:00 AM

Recently I sent a burgundy X2 back. When I received it new, it was sticking when trying to open, then the V Spring eventually broke. I emailed Xikar explaining the problem,They emailed me back about a week later with instructions for return, then I mailed the cutter to them for repair/repalcement. I'm currently using my 3 dollar cutter, as I did before I bought the Xikar, and it's still doing the job. I have to remind myself spend $$$$ n the cigar not the cigar accesories. DOH!

Sardious
Sunday, October 8, 2006 11:40:00 AM
bought a xikar when I first seen one many years ago, never had that happen to me or any of my friends. That is a fluke incident Xikar will replace
Charlie
Sunday, October 8, 2006 12:17:00 PM
The Hippos can be won for less than 10 bucks on bid board and they are just as damn good, with a bigger ring gauge as well.

Charlie

Schmitty22
Sunday, October 8, 2006 1:33:00 PM
i had one do that very same thing about a year ago. threw it out in frustration after many hours of trying to get it back together.

Have not bought another since.

Cheapo -throwaway for the win now for me.

Lizardo
Sunday, October 8, 2006 3:05:00 PM
^

eminnj1971
Wednesday, October 11, 2006 11:55:00 AM
I have had mine for over 5 years now, and never had a problem with it. Would recommend it to anyone and everyone.

Semper Fi

ChrisND
Wednesday, October 11, 2006 12:06:00 PM
Ive had to send 2 back...
SteveR@CigarBid
Wednesday, October 11, 2006 12:10:00 PM
I own 4 different Xikars and have yet to experience a problem with any of them. 2 of the models that I own are German-made, and tend to cut extremely well. The other 2 are China-made. While these two still cut very well, there's must be somebody special in Germany that can make an incredibly sharp blade.

Xikar's customer service is top-notch. If you ever have a problem, you can definitely contact them and they'll take care of you quickly, no questions asked.

pacman357
Wednesday, October 11, 2006 12:14:00 PM
I've got some cheapie punches and double blade cutters. Got the double blades here for something like $3 a pair. None have ever failed me, and they seem to cut my cigars just fine. I'd rather spend the money for the more expensive cutters on more cigars.
Matt76
Wednesday, October 11, 2006 1:28:00 PM
Well I have had a few problems with the Xikar cutter. First problem was when I received it from c-bid. The spring mechanism didn't work so you had to open it manually. I sent told c-bid about it and they sent me a new one, and I sent the broken one back.

Then I used it 2time accidentally dropped it in the grass and it fell apart. Had to send it back to Xikar to get it fixed. Got it back in 2.5weeks and it works "Sorta" the left blade is very smooth, but the right blade catches on something and doesn't close or open that well.

Wish i'd stuck with my cheapie

edwarderc2
Wednesday, October 11, 2006 3:43:00 PM
Want a nice Xikar? Try their Mean Sardine. It's a guillotine that cuts cleaner than any of their Xi line.
sloth
Wednesday, October 11, 2006 4:49:00 PM
i had one strangely pop apart when I lightly tossed it on my bed... I got it back together in about 10 minutes using nothing but my hands...

works fine