seabass
  • seabass
  • Connoisseur Topic Starter
Friday, November 3, 2006 7:57:00 PM
ok here's the deal i ordered beads i think' wont say from where. the bag is filled with little beads but when i add water to the bead they stay hard i am doing it write. any help in the mater will great

seabass

Thunder.Gerbil
Friday, November 3, 2006 7:59:00 PM
Did they change color?
seabass
  • seabass
  • Connoisseur Topic Starter
Friday, November 3, 2006 8:04:00 PM
no color change
seabass
  • seabass
  • Connoisseur Topic Starter
Friday, November 3, 2006 8:06:00 PM
some turned clear others already clear
les017
Friday, November 3, 2006 8:08:00 PM
with my beads "clear" means that they have absorbed moisture. White beads are dry. Sounds like you're ok. The beads do not get soft when they are exposed to water.

Make sure you are using distilled water for the longest bead life

dwalt10048
Friday, November 3, 2006 8:10:00 PM
As long as they're clear, you're good. If all are completely clear, then maybe a little over saturated. Don't worry till they turn white again, that's when you mist them with distilled water. I think your ok. Put them in your humi and wait.

Thunder.Gerbil
Friday, November 3, 2006 8:11:00 PM
Copied from another website:

--begin

Q: How can I tell when the beads need water?

A: This is very easy. The color of the beads is the dead give away. When they are full of distilled water they are pretty much clear and when they are completely dried out they are a bright white. Believe me you will be able to tell the difference.

Q: If my beads are going white, should I add distilled water until they are all clear?

A: The optimal is to have about 60% to 70% of the beads clear. Don't try to get them all clear because if you do they cannot absorb any sudden rise in humidity in your humi.

--End

Hope that helps some.

shep48gc
Saturday, November 4, 2006 2:09:00 AM
how can the beads be set a different humidity levels? Ive seen where they are sold for 60% 65% 70%. is there really a difference in the beads ?
Thunder.Gerbil
Saturday, November 4, 2006 5:44:00 AM
Different humidty levels = different combination of chemicals when being manufactured.
CWFoster
Saturday, November 4, 2006 2:17:00 PM
the RH levels are for personal preference. Some (including myself) like RH a bit lower than the oft stated 70% to improve draw on tightly rolled cigars.
Bigjohn-S
Monday, November 6, 2006 3:05:00 PM
difference between the bead and the 'humicare' jello stuff?
Nutttttttttty
Monday, November 6, 2006 5:41:00 PM
A world of difference I think Big John. Go with the beads.
engletl
Tuesday, November 7, 2006 3:17:00 AM
The beads are so much simpler than anything I have used.

Todd

JHC
  • JHC
  • Herf-A-Holic
Tuesday, November 7, 2006 4:02:00 AM
I prefer the gel / crystals. I lot easier to tell when they need water plus they hold over 100 times as much water. All depends on your location I believe.
Sardious
Tuesday, November 7, 2006 4:22:00 AM
I onlu have one bead using device....for me the gel stuff seems to be about just as easy to rehulate RH% but they go a LONG time before needing recharged
JHC
  • JHC
  • Herf-A-Holic
Tuesday, November 7, 2006 6:44:00 AM
A very long time in comparison.
engletl
Tuesday, November 7, 2006 7:27:00 AM
I agree the gel does work great. But here on the Gulf Coast The humidity is always extremly high. The gel doesn't absorb excess humidity like the beads as far as I know. I never could keep my humidity stable with the gel, and now with the beads it is a lot more constant.
golden13
Tuesday, November 7, 2006 9:15:00 AM
I like the gel jars also. I add water about once a month and it is simple. I have not had any problems yet and I have been using them for about a year. The humidity in PA is not bad, though.
JHC
  • JHC
  • Herf-A-Holic
Tuesday, November 7, 2006 11:11:00 AM
Being in PA they work best for me also.
beezer
Tuesday, November 7, 2006 11:37:00 AM
Here in Pa the gel works fine for me as well. 🙂