bigpeck5
Tuesday, December 26, 2006 10:19:00 AM
santa just bought me a 500 cigar humidor with all high quality spanish cedar,can someone tell me how long it takes for it to be ready for cigars,its been going seens 10 oclock xmas morning and the ga.is only reading 62% i have 3 humidifiers in it and 1 shot glass of distill water,the manual said not to wet the cedar it may cause splitting,they didn;t say how long it would take
jpotts
Tuesday, December 26, 2006 10:26:00 AM
I'd use more then a shot-glass full of water. I'd do a small glass of water or 50/50 solution, or a small bowl. The wider the opening on the container of 50/50 or water, the more surface area is exposed for evaporation (which is what you're doing with the water in the first place).

Outside of that, I haven't a clue about how long it will take.

THL
  • THL
  • Herf-A-Holic
Tuesday, December 26, 2006 10:41:00 AM
No way to tell, it takes as long as it takes. You can speed it up though. Use saucers of water instead of a shotglass. It exposes more surface area of the water to evaporate. Use distilled and EG in your humidifiers but you don't need it in the saucers as the water that evaporates is distilled by the evaporation process.

Probably more important than seasoning your humi is calibrating your hygrometer.

The last humi that I bought I just filled with cigars and it was stable in a week.

bigpeck5
Tuesday, December 26, 2006 11:25:00 AM
what the proper way to calibrate the hygrometer i try it 2 different ways and im getting 2 readings
jpotts
Tuesday, December 26, 2006 11:50:00 AM
I think nearly everybody uses the Salt Test. Put about a tablespoon of some kosher salt into a shotglass, and add distilled water to it until is becomes paste-like. Then put the shortglass and the hygrometer into a ziplock bag, and wait 8 hours (or overnight). That should mark the 70% - 75% level.

I'd also check the humidity by observing how dry the cap is on your favorite smokes when you cut it (do pieces come flying out like specks of dust) and how well it burns. Do this only with a stick that you're intimately familar with. If no little specks come flying out of the newly cut cap, but the burn is horrible, (and you have splitting problems after lighting), then your humidor is too moist. If flecks fall out after a cut on the cap, and the stick burns hot and fast, you're too dry.

bigpeck5
Tuesday, December 26, 2006 1:09:00 PM
i did the salt for 6 hrs came to 75% witch i thought was good but comparing it to my digital it was no where close. thanks for all the help i'll just keep trying
SteveS
Tuesday, December 26, 2006 1:19:00 PM
skip the 50-50 solution ... no need for that when seasoning your 'dor ...

in fact, after it's seasoned, which I'd say could be anywhere from a week to two weeks, I'd get some beads to regulate the release of moisture and skip the 50-50 altogether ... unless you actually LIKE fussing with the humidors a lot ...

bigpeck5
Tuesday, December 26, 2006 1:25:00 PM
i;m pertty new at all this only been smoking cigars for 2years so i,m still learning .but what are beads
SteveS
Tuesday, December 26, 2006 1:48:00 PM
'beads' are a specially engineered silica gel based product which provides extremely stable humidity conditions. Technically, they are engineered to have a hysteresis curve of 4% which reacts very quickly to changes in humidity to maintain a stable and self-correcting environment.

It is sold under a variety of trade names and is vailable in two different set points. The 70% media has a hysteresis curve of 68% - 72% and the 65% media has a hysteresis curve of 63% - 67%.

I personally prefer the 70% product for long-term storage and the 65% product for short-term storage ...

SteveS
Tuesday, December 26, 2006 1:54:00 PM
to my knowledge, CI/CBid is not yet selling this product under any name, although they are said to be about to do so ...

drop me an email and I'll aim you in the direction of where it is available ...

fromsteves at gmail dot com

note that 'from' is part of the address

tyrepeddler
Tuesday, December 26, 2006 2:28:00 PM
You need to give to at least 3 to 5 days or more You need to only use distilled water in a bowl and let keep it closed. I can see you are already peeking. Let it be closed for 2 or 3 days and dont peek it will get to where you want it. The cedar needs to absorb the humidity so that it stablizes. The best thing is beads not sold here. I can aim you in the right direction if you email me at jim.grossman at yahoo
pacman357
Tuesday, December 26, 2006 2:58:00 PM
You can speed up the seasoning by filling the humi with water and adding a couple gold fish.
mtstanger
Wednesday, December 27, 2006 9:22:00 AM
I know a great fish food website for a product not sold on this site. And if you overfill the humi, the fish may commit suicide by jumping out when you open the lid.
GreenWolf70
Thursday, December 28, 2006 7:42:00 AM
You can also speed up the seasoning by microwaving the shot glass full of water prior to putting in the humi. The heated water is absorbed quicker.

Beads are the best and if the RH is too high after seasoning, just throw in a dry bag to bring it down.

Personally, I would wipe down the inside, if for no other reason, than to clean out any dust or stuff left inside from contruction and/or shipping.

les017
Thursday, December 28, 2006 7:52:00 AM
I agree with Greenwolf on the wiping. Many say DO NOT wipe the sides because the wet will warp or split the wood. I agree IF you get it very wet.

When I wipe the sides I did it such that the wood colored for about 30 seconds, after that it looked dry. What I mean is VERY LIGHTLY run a barely-damp cloth. Do not try to soak it. You should be ok

SteveS
Thursday, December 28, 2006 8:15:00 AM
warping the wood isn't likely, but water could potentially raise the grain, which in turn could nick cigar wrappers ... I'd use a soft dry cloth to wipe the dust out ...

I know a lot of guys who wet-wipe their humis ... and many of report that they experienced no subsequent problems ... my take is why risk it? ... wood and water aren't friends ... maybe that'd be OK if you've got an inexpensive humidor that could readily be replaced at minimal cost, but if you've got a good one, why mess around? ... do it right the first time.

bigpeck5
Sunday, December 31, 2006 5:42:00 PM
thanks for all the help its coming around now
315press
Sunday, December 31, 2006 6:11:00 PM
Wipe it down

if you don't when you put your cigars in it and they are making contact with the sides and bottom, the wood will suck moisture from the cigars.

just take a sponge and get it wet with distilled water and rub once over all the inner wood.

heres the procedure for everything:

1. fill up your humidifying element, wipe down inside with sponge and put sponge (put the sponge on a plastic bag or something) with humidifyer inside and close for 24 hours.

2. Take out sponge, refill humidifying element, close for 24 hours

3. open and fill with cigars.

I received these instructions a long time ago, have used it for over 10 humidors and they all worked fine.

sli38
Sunday, December 31, 2006 7:18:00 PM
I've always wiped the inside with distilled water. never had a problem and I've done it many times over twenty years. When it's full of cigars it will be much easier to maintain the proper RH....