Darbarian
Thursday, December 28, 2006 11:29:00 AM
I have two hydrometers in my humidor and use 65% RH beads. My Csonka Hydromter reads about 55%, but the other brand reads right on with the beads at 65%.

Does anyone else have a Csonka and know the best way to calibrate it? When I hold the RESET button I get a readout that looks like this:

00 : 00

I can adjust the double zeros on each side like you would on an alarm clock, but I have no idea what this signifies. There was no manual with the hydrometer.

Thank for the help.

Dar

Darbarian
Thursday, December 28, 2006 12:44:00 PM
I purchsed the Csonka from Cbid. Just wondering if anyone else has had an issue.

Thanks.

Foodislife
Thursday, December 28, 2006 7:50:00 PM
I have one as well. By the salt test, 2 times, it reads 7 points low. I just add 7 when I read it. I also have a cheapo from Radio Shack that reads perfect. Call me silly but the only way you can be sure is by the salt test.
sw48362
Thursday, December 28, 2006 7:56:00 PM
I have one too. same issue. there is no way. Forget the salt test. You already know how far it's off.
Darbarian
Saturday, December 30, 2006 10:53:00 PM
Thanks Guys, mine seems anywhere from 7 to 10 points off. I'll just remeber to add as well.
Monday, January 1, 2007 5:29:00 AM
I have 2 Csonkas and both are off bwtw 7-10 degrees - expected much better performance from these.

c3s

Darbarian
Monday, January 1, 2007 6:18:00 AM
Here is the wierd thing. I tried holding down the reset button and then got those blinking numbers like one might on a digital clock. I set them to 0:00

Now the thing seems to read right on. I don't know if that will work for others, but so far, it seems to be making a difference. I'm not really even sure what I did there, but I assume it is a calabration setting.

Good luck!