MACS
  • MACS
  • Herf-A-Holic Topic Starter
Saturday, July 14, 2007 9:09:00 AM
A couple weeks ago I noticed that the 2 main valves to my sprinkler system in the back yard were leaking.

I went out to cut the grass today and they were shooting water out a few feet... um... I guess I should fix them now? But, I, um... don't really know much about sprinkler systems...???

NO MATTER!! I am Mr. freakin' fixit! So, I turned off the water and took a look at the valves. Both had cracks in the 'bonnet' part of the valve which is held on by about 8 screws. So, I took off one of the bonnets, disconnected the wires (solenoid operated) and took it to Home Depot.

Well... Home Depot doesn't have the brand I have (Iritrol) so I found one that looked exactly like it and bought 2. Got it home and found out it was a match.

Replaced the 2 bonnets, connected the solenoid wires, turned on the water and tested it. IT WORKED! And it no longer leaks.

Cost me a whopping $26 for the parts and took me about 30 minutes to do.

Moral of the story? If it looks easy, it probably is. Give it a shot before blowing $$$ to have somebody else do an easy job for you.

Oh... I cut the grass, too. Yard looks nice. Small, but nice.

Ram27
Saturday, July 14, 2007 9:36:00 AM
Why " Bless your little fixing heart " MAC !!!

Now go wish Slim a Happy Anniversary ~ LOL

Have a good weekend my friend.

Bloody will be along, when he shuts off the TV !!!

.........and finishes off his ' Victor Sinclair', smoked in honor of Slim !!!

usahog
Saturday, July 14, 2007 9:51:00 AM
See that Navy training paid off... you learnt about boiler systems and valves before you became a police officer type eh? LOL

Hog

MACS
  • MACS
  • Herf-A-Holic Topic Starter
Saturday, July 14, 2007 10:14:00 AM
Thanks Rammie.

Yeah, Hog... I was fixing steam turbines when I was 19. Valves, reducers, pumps, blowers, piping... but it was all Steel, not plastic.

Found out my main valve going out to the yard leaks by, too. When I turned the water off to the sprinklers the damn valves were still leaking pretty good. I was able to work with the water flow, no problem... but to change the main valve, I'll need a welder. I could weld, too, if I had the equipment.

Don'tcha just love High School shop?

usahog
Saturday, July 14, 2007 10:57:00 AM
they don't teach shop class's any longer around here and many other places because of Liability issue's??

I think it's BS truthfully.. but the mailman who played on Cheers? whatever his name is... has started a website and teaches these classes around the country for our youth Ag shop etc..

I think his website is called Nuts&bolts or something like that... They had him on Fox News later part of last month and did an interview with him about his reaching out to teach America's youth the fundamentals of keeping corprate America alive... So I visited his website and sent him an email Thanking him and his group on their efforts...

Made In USA!!

Hog

plinytheelder
Saturday, July 14, 2007 11:32:00 AM
MACS, are you talking about pipes soldered together?
bloody spaniard
Saturday, July 14, 2007 12:15:00 PM
Well done, MACS. Like Hog, you too have ample improvisational skills. Although, why you have an auto sprinkler system for a 8'x10' yard, I'll never know.

Ok kidding aside, I too have to join the brotherhood of capable fixer-uppers on this thread.

After cutting my front & back yards with mower and tractor respectively, I paused for a cold drink of water. Then I came back out leaving clippings throughout the house much to Eve's delight. As I began to water a few shrubs, my youngest (Steve-6) pointed out a leak in my garden (not anatomical) hose. I gulped and pretended not to panic as I finished watering the ornamentals. Then I squinted in deep thought as I puffed on a yard stick (insert La Floridita, Don Tomas, Placido Domingo, etc. here) and evaluated the daunting challenge before me, turned off the water, and marked the spot that had been squirting like one of John D. Rockefeller's lactating mistresses.

AH HA! Just them I knew what had to be done. I scampered inside again strewing grass to & fro, found some duct tape & carefully taped the leak until it spurted no more.

Like the French say- VIOLA! Mission accomplished.

It cost me $1.96 for the tape (economy pack).

I also have a moral to my story, "Whatever the conceited mind of man can anticipate, man can conceive and repair with duct tape" or something like that.

Now I will challenge my eye muscles with martial arts on my plasma, you bastid.

jjohnson28
Saturday, July 14, 2007 12:18:00 PM
Shawn, like plinytheelder is saying. I don't think it's welded per say, it's just copper pipes and a valve sweat soldered together. This is way easy to do, you can do it with a propane torch from Home Depot. Oh and it's kind of fun too. Hell if you've got a small table top type torch for lighting cigars you could even use that. The secret is in cleaning the joints very well with sand paper and using flux. Google sweat soldering.

JJ

bloody spaniard
Saturday, July 14, 2007 12:21:00 PM
Shawn, don't listen to him. If it works leave it alone.
plinytheelder
Saturday, July 14, 2007 12:28:00 PM
Thats it JJ, right where I was goin...

I've sweated my sprinkler valves off the pipes in my front yard apart a couple of times. Its kinda fun.

jjohnson28
Saturday, July 14, 2007 12:30:00 PM
Well OK, butt ifin you ever get a leak inside the house and need to shut the water supply down, you can thank your buddy bloody. Cause your screwed...LOL

How's it hanging there Mr Spaniard?

plinytheelder
Saturday, July 14, 2007 12:31:00 PM
Don't listen to Bloody... He's trying to lure you to the dark side.

Now that you're RETIRED, you gotta learn to repair stuff.

Duct tape on sprinklers isn't repairing...

bloody spaniard
Saturday, July 14, 2007 12:33:00 PM
Tanned, tired, filthy, and thirsty- so what's new with you?
bloody spaniard
Saturday, July 14, 2007 12:34:00 PM
No, no, Pliny, tape for water hoses and airplane parts only! LOL
plinytheelder
Saturday, July 14, 2007 12:35:00 PM
As an airplane mechanic, I can swear by the value of tape...
jjohnson28
Saturday, July 14, 2007 12:36:00 PM
Heading over to BuddahDaddy's in a bit to christen his new Herfatorium. HomeBrew, BBQ and ceegars. Life is good.
bloody spaniard
Saturday, July 14, 2007 12:49:00 PM
LOL@ Pliny!

JJ, please give my very best to brother Buddha & have fun. I've heard he's a lot of fun.

MACS
  • MACS
  • Herf-A-Holic Topic Starter
Saturday, July 14, 2007 1:13:00 PM
You go bloody! I always have duct tape in the house. Always have glass cleaner, a few rags and jumper cables in the car, too. (for cleaning windows and jump starts, ya perverts)

JJ - the MAIN valve to the whole shebang is in the garage. It's a butterfly valve and those are not known for leak-by. It'll hold. I just didn't want to shut off water to the whole house to fix a couple sprinkler valves.

The main sprinkler valve comes off the garage right by my front hose spigot. After looking at it, you're right... it's soldered, not welded. I know how to solder, too. HT's taught me. (HT's are Hull technicians, or Navy welders)

Buddha sent me an invite as well, so I'll see you over there about 6pm.

pacman357
Saturday, July 14, 2007 3:10:00 PM
My dad had a business when I was a kid. He sold plumbing supplies wholesale, a business his dad started. As a result, I learned a lot about plumbing. Most of it is actually pretty simple. Makes you wonder why the hell plumbers charge so damned much.
plinytheelder
Saturday, July 14, 2007 6:48:00 PM
They can charge a lot because most people don't know how to fix their homes.

Kinda like Lawyering... 😉