blacky............
Mash Tun:
Get a big cooler and install (or modify exisiting) a spigot at the bottom.
Get a length of stainless steel braided tubing (about 4') and remove the inner rubber hose so you just have the braid as a filter............attach this to the INSIDE of the spigot tube. Essentially you have a filtered pickup tube.
After this it is easy.......mash in with heated water (180F I think)............let it rest, then run it off and sparge with 170F water. I sparged with a beer pitcher that I drilled a bunch of holes in the bottom.
I used to get up at 4:00AM and start the burners........go back go bed. After an hour or two, I'd get up and adjust the water temp and "mash in"..........then go back to bed.
After a bit I'd get back up and start running the wort off.
Good times!