wheelrite
Wednesday, April 23, 2008 12:32:00 PM
Well,

The Oak Floor is finished.(about a week ago)So next is constructing a bar.

I plan on installing a keg cooler.I have done some research and would appreciate some feed back from any of you guys that may have one.

wheel,,

big chief
Wednesday, April 23, 2008 12:44:00 PM
Beer not last long here. No need to make place to store it.
tdtall70
Wednesday, April 23, 2008 1:14:00 PM
Big chief like fire-water? I'll give you 10 bottles of fire-water for Arizona...
Darkroller
Wednesday, April 23, 2008 1:17:00 PM
I ahve one that I built into my bar. I modified a 9 cubic foot sanyo refrigerator. Pulled all the shelving out. I bought a kegerator conversion kit (tap, hoses, co2 tank). Drilled 2 holes and voila...kegerator. It sits on a wood floor and keep the beer ICE cold....no probs here. Just getting a carpernter to work around it and trim it out was the fun part.
jjohnson28
Wednesday, April 23, 2008 1:28:00 PM
I'd do a converted freezer depending on space and budget. This way you could get multiple smaller kegs or at least a couple of larger ones. I'm semi-swamped right now but I'll try and google a couple of sites later on. Basically all you need is a freezer and a temperature controler (Home brew supply about $60?) to bring the temp up to beer temp and you build it into or under your bar.
jjohnson28
Wednesday, April 23, 2008 1:42:00 PM
This ones pretty good but there were some better ones out there.

http://www.west-point.org/users/usma1986/42894/kegerator.htm 

wheelrite
Wednesday, April 23, 2008 1:45:00 PM
JJ,

Thanks.

btw,

Is you tap tower mounted on the bar top.If so,do you have excessive foam,or does it stay cool enough in the tower?

wheel,,

plinytheelder
Wednesday, April 23, 2008 2:02:00 PM
wheel, be careful with a tower that isn't mounted on the cooling device.

When bars, or brewpubs, have towers on their counters and run lines to them, the lines need to be cooled or the beer can have foaming issues.

Also, the length of the lines can be a problem with sanitation.

eljefe
Wednesday, April 23, 2008 7:11:00 PM
Just be careful about interior dimensions of the fridge. I was gifted a "Avanti" brand and it works great except it wont't hold Coors/Molson kegs which are wider in middle than other brands.

Like this( )instead of this[ ]

andytv
Wednesday, April 23, 2008 7:14:00 PM
Mine is a full size fridge located in a separate room.....plumbed through the wall in improvised double wall insulated pipe.

Only the taps (over the sink) are located in my game room.

rfenst
Wednesday, April 23, 2008 7:28:00 PM
^

Man-o-man! You are a profesional!

andytv
Wednesday, April 23, 2008 7:31:00 PM
^yep
rastusmcnair
Thursday, April 24, 2008 7:04:00 AM
I've had a converted fridge setup in our basement rec room for about five years now. It's fitted into what used to be a closet so just the doors are exposed. The fridge part holds a 1/2 keg and sometimes excess from our kitchen fridge. Tap and tray on the door. The freezer on top keeps pitchers and glasses nice and frosty. Also a nice cold bottle of Jagermeister.

The only problem I've faced is the darn thing goes empty every two weeks or so.