Can someone explain the salt test, I want to test my hygrometer.

How To Calibrate a Hygrometer

To calibrate your hygrometer you will need table salt, a see through container such as a Ziplock baggie, and a small shallow open container, like a bottle cap.
Place a teaspoon or so of salt in the shallow container and add a few drops of water to get it wet. You don't want to dissolve it, just get a good damp pile of salt in your container. Remember, you don't want a salt water solution, just damp salt. Place the shallow container in the baggie along with the hygrometer.

Seal the baggie with some air trapped inside (so it is not tight against the hygrometer) and let it sit. Allow this to stabilize for at least 6 hours (don't rush it). After it has stabilized, check the hygrometer reading without opening up the baggie. It should be exactly 75%. If not, you can simply adjust the reading by turning the dial on the back of the hygrometer with a small screwdriver.

Great information! I have wondered how real those readings are, and now I will test mine out!

I found an easy way to calibrate all of my hygrometers. I borrowed a friends digital hygrometer and used it to monitor my 3 over a period of a week. I got them all calibrated and I also know thier range since they all seem to read differntly. They all read 70% untill the humidity changes then they will all change varying amounts.