mydsooner
Thursday, November 11, 2004 11:11:00 AM
Im building a humi and was checking on some spanish cedar prices. $5.50 a square foot here in Oklahoma! Oak is only $3.40. Anyway, the guy on the phone ask me if id like to try something called Okume.

Anyone ever tried or here of this before. Im doing a google search for as soon as i post this. But i was curious if anyone is useing it?

jeezy peezy!

Jeff

bassdude
Thursday, November 11, 2004 11:41:00 AM
if you build with Oak are you going to line with SC?
SteveS
Thursday, November 11, 2004 11:42:00 AM
I know a very little about it ... basically, it's an Oriental multi-purpose wood ... furniture, cabinetry and so forth ... nice looking grain ...

I'd say it might be OK if you were going to use it to construct the exterior of a humidor that you were going to line with spanish cedar but I've got serious reservations about using it as a substitute for the spanish cedar ... I think your wood guy isn't aware of the reason for using spanish cedar on the inside and is a nice guy who's just looking to tip you on a less expensive material ...

Martin2277
Thursday, November 11, 2004 11:50:00 AM
Jeff take a look at this and decide for yourself. IMHO I would only want to use the Spanish Cedar. For ageing, taste, ect.....

www.humidor-guide.com

Mike

PS I think this ok on the fourm. It is just info.

johnfs
Thursday, November 11, 2004 11:50:00 AM
Use a white oak over red. Red has an open grain and may warp and the jointery could fail from the moisture.

J

rodnie
Thursday, November 11, 2004 11:51:00 AM
I might use that on the bottom if it's sturdy and I would use it for the top if it has some weight to it, but I would stick the SC for everything else. That's my 0.02 for the day.

PMoreno349
Thursday, November 11, 2004 12:10:00 PM
Are you sure it is square foot (usually the units of a veneer) or board foot (usually the units for raw wood).

If it is board foot, then that is actually a pretty good price. If it is square foot, then it depends on the thickness of the material to determine whether it is a good price, but it sounds like it is in the right ballpark (it is just expensive), and you should bite the bullet and use spanish cedar and not try to substitute it with something else.

PMoreno349
Thursday, November 11, 2004 12:11:00 PM
this is the cheapest I have found spanish cedar

http://www.westwindhardwood.com/price.html 

usahog
Thursday, November 11, 2004 12:12:00 PM
mydsooner drop me an email on the SC... usahog at hotmail dot com...

also when you get ready to seal the wood or stain it.. use a water based finish... oil base varnish's & poly's tend to never get rid of the smell...

Hog

Goody
Thursday, November 11, 2004 12:40:00 PM
lemme talk to a buddy of mine I think I know where you can get it cheaper in OK....

Goody

Browns82
Thursday, November 11, 2004 12:49:00 PM
My .02...

My local shop uses something called western inland cedar in their walk-in humidor. They've been around for a long time and I've never had a problem with anything I've bought there.

ericsgr
Thursday, November 11, 2004 12:51:00 PM
what is a board foot?
SteveS
Thursday, November 11, 2004 12:57:00 PM
The answer is both simple and complicated ... here's the link to an explanation that's as good as anyone could possibly give you ...

http://www.woodweb.com/knowledge_base/What_is_a_Board_Foot.html 

mydsooner
Thursday, November 11, 2004 12:59:00 PM
Hog...email sent

Goody....thanks for looking out.

Like i told HOG...it get alittle overwhelming reading all of the ways of doing this.

I might not have told the guy what i was building. And now that i think about it he did say board feet and not square feet.

Thanx to everybody for your help.

jeezy peezy!

Jeff

usahog
Thursday, November 11, 2004 1:23:00 PM
ericsgr, "what is a board foot?"

board foot is how lumber is measured.. usually hardwood lumbers for woodworkers/woodworking...

a board that is 6" wide X 6" long X 1" thick is measured as 1 board foot... so on and so forth... 3/4" stock wood rounds out as 1" thick in the lumber world.. measured in 1/4" increments a total thickness of a baord is measured as 4/4 = 1" 5/4 = 1 1/4" 8/4 = 2"

Hope this helps explain??

Jeff email sent!!!

Hog

castlewa
Thursday, November 11, 2004 2:16:00 PM
When we are talking 1'bm are we talking nominal or net size ;)?

I am having a custom humidor made and am looking at using Honduran mahogany with lacewood panels, lined with spanish cedar.

Anyone ever use fir or any other softwood for the exterior?

Thread Jack Off!

C-WA

PMoreno349
Thursday, November 11, 2004 2:47:00 PM
Hog, did you mean to say 1 board foot = 1"x12"x12" ?

The typical definition of Board Foot that I am familiar with is 144 cubic inches

To answer the question of difference, board foot is a measure of volume (accounting for thickness), but square foot is only a measure of area (one less dimension).

tornado
Thursday, November 11, 2004 3:22:00 PM
Do a search on the trade forum for spanish cedar. I have a large quantity that I'm willing to trade/sell and I'll precut it to whatever dimensions you need.
xrundog
Friday, November 12, 2004 4:05:00 AM
Iam not familiar with Okume. As to the rest: A soft wood retains alot of moisture, or sap. Even if it's been dried. The Spanish cedar will pull this out of the soft wood and will F**K up your cigars! You CAN use soft wood IF you line the box with metal before Spanish Cedar. Using a Polyurethane sealer won't stop the process. I know this because I experimented with a pine box I thought was pretty cool. Honduran Mahogany is often used and, from what I understand, doesn't require a liner. Never used it myself.
usahog
Friday, November 12, 2004 5:30:00 AM
PMoreno349, dad gumit... you got me confused now... so here's a link to figure your bd footage

http://www.woodworkersweb.com/footulator.htm 

without looking at a board with a measuring stick... I'm confused LOL...

but yep 144 cubic inches is what you want to figure for board foot

here's a link to some more calculators..

http://www.woodworkersweb.com./woodcalc.htm 

xrundog, your right on the soft woods for humidors... and the honduran mahogany also...

when working with these woods,(cutting/sanding etc.) many people these woods will irritate sinus's and even skin rashs...

Jeff hope that info helped ya out!!!

Hog