golden13
Thursday, September 21, 2006 9:12:00 AM
I know there are some flooring experts here (such as rugrunner), so I thought I would take a shot. I am remodeling my entire upstairs right now. I want to lay laminate flooring (ie Pergo)down in some of the rooms. My issue is that I have old cast iron radiators in the house. I do not want to replace the radiators as they are a great heat source. I wanted to find out if it is ok to put the radiators on top of the flooring. Since they are a 'floating floor system', I was leary of setting such a heavy object on it. Any help that anyone can provide would be greatly appreciated. Thanks.

Gary

engletl
Thursday, September 21, 2006 9:17:00 AM
Many people down here in the Katrina zone went with the laminate. I assume your radiators can't be any heavier than any bed or entertainment center. I think you would be fine with them on the new floor.

Todd

ruggysgirl
Thursday, September 21, 2006 9:17:00 AM
Rugrunner says as long as they aren't bolted to the floor. The floor needs to be able to "float." If you do need to bolt them to the floor, cut the bolt holes so that the floor can move around them. I don't recall him telling me how much bigger, so hopefully he will check this thread when he gets home, in case you have any questions.
golden13
Thursday, September 21, 2006 9:33:00 AM
They are not bolted down. The pipes do have some play in them also. However, I was going to lay the radiator right on top of the flooring and just cut around the pipes.

As far as the weight of them, they are heavier than a bed or entertainment center. The bedroom ones are probably a good 400 lbs each.

Thanks for the input so far.

golden13
Thursday, September 21, 2006 4:13:00 PM
^ for rugrunner or any other experts.
rugrunner
Thursday, September 21, 2006 5:56:00 PM
Gold, I have done laminate floors and screwed down lre islands with granite tops. As long as the floor is able to expand and contract. 400 pounds won't even slow it down. I have seen laminate floors that are cut tight to the wall lift up in the middle of the room 6 to 8 inches. I would make sure you have at least 1/2 inch around any pipes. If you don't leave enough space you'd hate to bust the pipe and flood your house.

If you need any other info you can email me (me at hotmail) or call (email for number).

Also, make sure you leave min of 1/4 inch space on every side! Also look into a heavy duty rubber pad to go under laminate as it deadens the sound and makes the floor fel much more real.

golden13
Thursday, September 21, 2006 6:18:00 PM
rug, thanks. I knew you would have the answer. I have put down laminate flooring before, but not with anything like these radiators. I know about the 1/4" around the walls. I will definitely keep it at least 1/" from the pipes and cover the hole/gap with noce escuchions (sp?). Thanks a million for the help.
rugrunner
Thursday, September 21, 2006 6:47:00 PM
no problemo.

look into that pad.