alr829
  • alr829
  • Connoisseur Topic Starter
Tuesday, January 9, 2007 2:03:00 AM
when a wick lighter will not spark you replace the flint----when a torch lighter will not spark ,is it finished?---
CBOB
Tuesday, January 9, 2007 2:51:00 AM
depends if it's a colibri, so they say.
J.Redleg
Tuesday, January 9, 2007 3:06:00 AM
Try blowing out the area with some compressed air. That worked for me once.
Charlie
Tuesday, January 9, 2007 6:18:00 AM
If it is a colibri, toss it away and buy a decent lighter...then you can use compressed air to clean it out.

Charlie

Sfraun04
Tuesday, January 9, 2007 6:20:00 AM
Give the compressed air a shot first, and if that doesn't work it's done for.

Ahhhh! Logical C&R question in the Misc forum! Help! I was forced to think!

sw48362
Tuesday, January 9, 2007 7:34:00 AM
alr,

My Colibri(s) only works with one type of fuel, zippo premium, and I'm not joking. 2nd, you have to purge the lighter before refilling(most times), 3rd you have to let the fuel inside the lighter reach room temperature, before use. I put the lighter in my pant pocket to warm from body heat.

Using the above advice and a few flame adjustments, all my colibri's now work. Glad I didn't throw them out when I first started this hobby.

For what it's worth, the single flame Colibri-II is my go to lighter.

jjohnson28
Tuesday, January 9, 2007 7:45:00 AM
If you don't have compressed air you can just invert the can of butane over the orifice and give it a couple of good blasts. Safety tip, let the lighter dry out completely before trying to light it.

JJ

Charlie
Tuesday, January 9, 2007 8:07:00 AM
Yeah, you will look like Daffy Duck or the Roadrunner in one of the old Warner Bros cartoons if you are not careful....

Charlie

nine999
Tuesday, January 9, 2007 10:00:00 PM
NINE!

nine