RICKAMAVEN
Friday, March 9, 2007 9:11:00 AM
is the surround sound generated by the tv program or a dvd, or does the surround sound receiver seperate the sound to all the speakers?

if it matters, i am using an onkyo

DrMaddVibe
Friday, March 9, 2007 9:16:00 AM
5:1?
DrMaddVibe
Friday, March 9, 2007 9:19:00 AM
If its an older movie it might not be capable.
DrMaddVibe
Friday, March 9, 2007 9:20:00 AM
Does it work with any other movies?
ixlr8
Friday, March 9, 2007 9:35:00 AM
Dolby Surround Basics

The Dolby Surround process involves encoding four channels of information--Front Left, Center, Front Right, and Rear Surround into a two channel signal. A decoding chip then decodes the four channels and sends them to the appropriate destination, the Left, Right, Rear, and Phantom Center (center channel is derived from the L/R front channels).

The result of Dolby Surround mixing is a more balanced listening environment in which the main sounds derive from the left and right channels, the vocal or dialog emanates from the center phantom channel, and the ambience or effects information comes in from behind the listener.

In musical recordings encoded with this process the sound has a more natural feel, with better acoustical cues. In movie soundtracks the sensation of sounds moving from front to rear and left to right adds more realism to the viewing/listening experience by placing the viewer in the action. Dolby Surround is easily useful in both musical and film sound recording.

The Limitation Of Dolby Surround

Dolby Surround does have its limitations however, with the rear channel being basically passive, it lacks precise directionality. Also, overall separation between channels is much less than a typical Stereophonic recording.

Dolby Pro Logic

Dolby Pro Logic addresses the limitations of standard Dolby Surround by adding firmware and hardware elements in the decoding chip that emphasize important directional cues in a movie soundtrack. In other words, the decoding chip will add emphasis to directional sounds by increasing the output of the directional sounds in their respective channels.

This process, although not important in musical recordings, is very effective for film soundtracks and adds more accuracy to effects such as explosions, planes flying overhead, etc.. There is greater separation between channels. In addition, Dolby Pro Logic extracts a dedicated Center Channel that more accurately centers the dialog (this necessitates a center channel speaker for full effect) in a movie soundtrack.

jbu
  • jbu
  • Herf-A-Holic
Friday, March 9, 2007 10:02:00 AM
Rick,

A comprehensive answer is yes, it does both.

Older stuff and most TV programs 'extrapolate' the information for the rear channels from the regular 2 channel audio.

Newer stuff, recorded in dolby digital and other formats has sperate tracks for the rear channel. (think eight track audio)

So I think your real question may be wirring. Yes you need to run wires for digital sound if you want it. I.e. 5 wires going from the dvd and cable box to your receiver. When the program is analog only the receiver will still get the 2 channel sound from the same wires. You can also run digital outs (single wire) however most cable/sat boxes dont have that feature.

Porn is always in glorious surround.

pacman357
Friday, March 9, 2007 2:23:00 PM
Rick, being the meat in an Andy and Pablo sandwich ain't exactly surround sound. It's something...just not sure I want to know what.

:)~~~~~~~~~~~~~~

pabloescabar
Friday, March 9, 2007 2:26:00 PM
very slanderous Pacman, I think I'm going to speak to my Layer.
RICKAMAVEN
Friday, March 9, 2007 2:53:00 PM
6. Author: jbu

good thing i know what extrapolate means.

every thing hooked up with 16 gauge wire. the only thing missing is the cable box to the receiver with an optical cable.right know its just rca cables so i am loosing something from the satilite box.

no harm the dvd is connected to the tv with an HDMI cable

and a fibre optic cable to the onkyo and we are making the bedroom the movie room

jbu
  • jbu
  • Herf-A-Holic
Friday, March 9, 2007 2:59:00 PM
Rick,

Fiberoptic cable BAD!

RCA- HDMI- DIGITAL RCA---good

RICKAMAVEN
Friday, March 9, 2007 3:00:00 PM
5. Author: ixlr8

i'm not sure if you are suggesting i change the receiver from all channel setting to pro logic which is one of the settings.

jbu
  • jbu
  • Herf-A-Holic
Friday, March 9, 2007 3:01:00 PM
rick,

leave it on auto

bsevern
Friday, March 9, 2007 11:44:00 PM
ixlr8 your information is dated. It's accurate, but you stop in the 1980's when Dolby Surround reigned supreme. Now we have Dolby Digital 5.1, PrologicII, Dolby Digital EX, DTS6.1/DTS-ES, etc.

Dolby Digital 5.1 is a 5.1 Channel Surround (digital discrete: Dolby Digital, DTS) delivers 5 audio channels and 1 LFE (subwoofer) channel from a 6 channel source

6.1 Channel Surround (digital discrete: Dolby Digital EX) delivers 5 audio channels, 1 extracted audio channel and 1 LFE channel from a 6 channel source

6.1 Channel Surround (digital discrete: DTS-ES) delivers 6 audio channels and 1 LFE channel from a 7 channel source

7.1 Channel Surround (digital discrete: Dolby Digital Plus, DTS-HD) delivers 7 audio channels and 1 LFE channel from an 8 channel source

I run a 7.1 system, and it sounds better then most movie theaters I've been to (and I don't have to listen to the punks with their cell phones!).

pacman357
Saturday, March 10, 2007 4:12:00 AM
#8 "I'm going to speak to my Layer."

Oops. Looks like a Freudian ****.

LOL