"I did what the guy that sold it to me suggested, which was to rub it down with distilled water several times."
That really wasn't a good idea. Wood + water = warping. You'll probably be ok, but IMO, not a good idea for future humis. Just put the humidifers in and close the lid for a week. The wood will absorb the moisture on it's own and you won't have to worry about warping, water stains or leaving bits and pieces of wet paper towel all over the inside of the humi.
---------------------
" I then put the humidification unit and hygrometer unit in the box along with my sticks. Now, my hygrometer shows 95% humidity. That can't be right as the gars aren't soggy. But, any suggestions here? "
1) what are you using to hydrate the credo? 50/50 PG solution, sometimes called 70/70 (50/50 is the percentage of H2) and PG, 70/70 refers to it's properties of 70RH at 70F)
2) Did you salt test & recalibrate the hygrometer?
3) It is possible that the inside of the humi is at 95%RH. Depends on how much you saturated the wood with the ill-advised rubdown. It takes a few days to a few weeks depending on the cigar in question and the presence/absence of cello for a cigar to absorb that much moisture.