ggriffi
  • ggriffi
  • Herf-A-Holic Topic Starter
Wednesday, August 29, 2007 5:42:00 PM
I searched for a problem like this but couldn't find anything like it, so here goes. Not long ago I calibrated my two hygros for my two humidors. The one I could adjust I did and put it back in the boveda bag and let it sit for another 24 hrs an it was dead on 75% rh. The other one doesn't adjust so I made note of the difference and keep track of that one that way. I have 65% beads and the adjustable one is consistently at 72%. I put it back in the bag today and it still right on 75% It is in a 150 count humi(full) and the non adjust one is in a 20 count also full and it has stayed right at 67% (with the correction). I do have the right amount of beds in the 150ct. I just wonder why in this one humi that rh is so high? Do I need more water in my beads or should I just let it ride and let the beads dry out some?

TIA,

gary

GreenWolf70
Wednesday, August 29, 2007 5:59:00 PM
You have too much water in your beads. If you have more beads add a small bag to soak up the extra RH.
Thunder.Gerbil
Wednesday, August 29, 2007 6:02:00 PM
You need to definately stop watering the beads in the big humidor for awhile and probably wouldn't hurt to stop watering the beads in the small one to, at least for the short term.

When most/all of the beads are saturated with water, they will be unable to absorb any excess humidity in the humidor.

You can leave the lid open for a day or so to vent off the excess humidity and then see where you're at.