tonylum
  • tonylum
  • Connoisseur Topic Starter
Sunday, September 14, 2003 6:16:00 PM
Did anyone ever make there own humidor. I was thinking of building my own, and was just checking out some Spanish cedar. I want to know how thick should the cedar be, that I line the humidor with. I saw many different thicknesses, but the thicker the cedar the more costly it got. Would 1/8" cedar do the trick? or do I need something thicker.
0patience
Sunday, September 14, 2003 6:34:00 PM
I may be way off, beings I have only checked into building a humidor, but every one that I have looked at that I wanted to see about making a copy of, had mahogany, burl, cherry, myrtlewood or some other wood for the outer casing and 1/8" spanish cedar for the lining on the sides and bottom and 1/4" thick on the top. Alot of them cautioned about the glue to use.

I apologize, but I didn't pay attention to what they recommended.

Hope this is of some help.

usahog
Sunday, September 14, 2003 8:17:00 PM
Any Glue that is Flamable would be a No No for a Humi... meaning even after drying.. with the Seal on the Humidor which Air Tight Seal is a must.. and the climatization process inside the box IE dampness moisture etc. the glues substance can intertwine with the cigars as they breath and thus cause you problems... I have two Humidors in my Shop, Cut out and peiced together waiting for me to get off my ass and complete them... I am using 3/16 SC on the sides and 1/4 on top and bottom. one is of Brazilian Cherry Outer and the other is Teak Wood... I also have another one but I'm not going into detail on it...other then the outer wood is Hickory!!!

on a sealer finish I plan on using what I always use on my Flag Cases... it is water based Poly... with this Poly you do not have to worry about fumes off Oil based products...

the inner Ceder at 3/16ths allows me a thick enough wood base to help with the seals lip..

hope this helps...

Hog

xrundog
Monday, September 15, 2003 4:43:00 AM
I've built a couple humis and restored several. I think 1/4" is the thinnest SC you can use. 1. it's hard to get a decent miter cut on 1/8". 2. I am not sure 1/8" will give the desired moisture retention properties. You could use 1/8" on the inner top and bottom. Some old humis have glass on the top and bottom. With 1/4" SC on the sides, they work fine. But then, You might have to order 2 batches of SC (in TN I had to mail order all of it).
mkraus47
Monday, September 15, 2003 7:38:00 AM
Where do you guys mail order it from? I am making a coolordor and thought maybe a cerdar lining would be good. MK
tonylum
  • tonylum
  • Connoisseur Topic Starter
Monday, September 15, 2003 7:40:00 AM
Thanks for all the help. Guess I might go with both 1/8 and 1/4, for the sides and top.
00camper
Monday, September 15, 2003 7:49:00 AM
I got spanish cedar boards 3/16" thick and 24" long from the Woodcraft Store for about $4. They sell online and have retail stores throughout the US. Search for them online and then choose the store locator on the website to see if one is near you.
turnberry
Tuesday, September 16, 2003 5:57:00 AM
Wall Lumber has come up from time to time in these discussions as a source for Spanish Cedar and other hardwoods.

www.walllumber.com

xrundog
Tuesday, September 16, 2003 9:04:00 AM
lumberforsale.com
Robby
Tuesday, September 16, 2003 9:59:00 AM
Just look in the Yellow Pages and find lumber yards in your area. Not the Home Depot or other similar places. Call and ensure that they stock Spanish Cedar. If they do, you can buy planks of it, plane it, rip it, glue it, then cut to fit, and viola! That's how I made the ploomidor...
usahog
Monday, February 7, 2005 2:39:00 PM
^ Pop...

I did find this old thread with usefull info on it...

Hog

BornADuck
Monday, February 7, 2005 2:51:00 PM
Thanks Hog!!!
mrtelcom
Monday, February 7, 2005 2:53:00 PM
It's been a while since I've seen the Plumidor. Need to go kick Robby in the jimmies tomorrow to invite me over.
usahog
Monday, February 7, 2005 3:03:00 PM
LOL @ Telcom!!!

tell Robby I said hello also!!!

Hog

mrtelcom
Monday, February 7, 2005 3:28:00 PM
Will do Hog.