mkraus47
Monday, February 28, 2005 9:44:00 AM
So here's the deal. I have a coolerdor now because of all the smokes I have purchased (thanks C-bid!). I have lined it with Cedar, and it looks, and for the most part works, perfect. The problem is the humidity is higher at the bottom of the humidor than at the top. I have Climax beads (the 70 variety) and the humidity on the bottom is 75-76, while on top it is a steady 71. My question is: Will the 75% humidity damage my smokes or promote mold or anything like that? If so, how do you recommend I bring the humidity down? I would not mind having the readings be 65% on top and 70% on bottem, but the way it is now has me worried. I have had this up and running for about a year now and never checked the bottom humidity until this weekend. I always thought the 71 on top was perfect. Any thoughts?

Thanks!

MK

Burky4467
Monday, February 28, 2005 9:57:00 AM
Did you add extra cedar?? This could be the problem!
Burky4467
Monday, February 28, 2005 9:57:00 AM
Did you add extra cedar?? This could be the problem!
Burky4467
Monday, February 28, 2005 9:59:00 AM
Sorry I didn't read this well enough. I thought you said it was a humidor not a coolidor.
dave97402
Monday, February 28, 2005 11:30:00 AM
65% beads is the best thing. Question....are their any newer boxes or smokes in there? Sometimes vendors over humidify, so until they stabilize will add humidity.

Dave

mkraus47
Monday, February 28, 2005 11:33:00 AM
About half of the stock is new. That might equate for some of the flux, but why not the whole humi?
dave97402
Monday, February 28, 2005 11:40:00 AM
I don't know why not the whole thing, I have one that does kinda the same, though not by as much of a difference. But overall it hasn't really been an issue. I think the key is.....don't get anal over the "70%" thing. As long as they don't get too high (like 80%) and the temp doesn't get too high too, it'll be fine. Smoke em....do they smoke good? Then it's perfect! LOL

Dave

mkraus47
Monday, February 28, 2005 12:07:00 PM
I will say this, everything in there smokes just fine, I have no problems. I guess if it aint broke don't fix it right? Thanks for your help!
crptman
Monday, February 28, 2005 12:08:00 PM
I agree with Dave. Don't over-fixate about the humidity. Keep ave. around 7o% and enjoy!
xrundog
Monday, February 28, 2005 12:49:00 PM
Hell, I think 70% is too much!
Slimboli
Monday, February 28, 2005 3:16:00 PM
Humidity - How much is too much?

When your cigars start growing mold ... 😉

arwings
Monday, February 28, 2005 3:44:00 PM
As a general rule I think humidity is a matter of choice. But three things I take into consideration with increasing humidity:

1. The smokability of the cigars. Generally the higher the humidity, the more difficult the draw.

2. As humidity increases, so does the possibility of mold developing.

3. As humidity increases, so does the optimal environment for the hatching of the dreaded tobacco beetle.

For the above reasons I try to maintain a 65 - 67% humidified environment. Difficult to do at times, true, but I really work on it. To me, if the humidity is going to be off at all, you are better off opting for a lower humidity rather than a higher one. You can always bring the humidity up just prior to smoking the cigars if you choose. Just my thoughts..........