andytv
  • andytv
  • Herf-A-Holic Topic Starter
Tuesday, March 8, 2005 11:56:00 AM
I am fortunate to have access to a very hi-tech cutting tool.

Basically, any it can cut any 2D pattern you can define with a CAD file. There is no heat associated with the process, and only .040" of kerf width is lost in scrap.

I also have 2 square feet of 1/4" thick spanish cedar.

Lets put our heads together and come up with some sort of unique cigar/humidor-related item that I could cut.

crptman
Tuesday, March 8, 2005 12:37:00 PM
Sounds great, but you lost this Wop in the 2nd paragraph!!
andytv
  • andytv
  • Herf-A-Holic Topic Starter
Tuesday, March 8, 2005 5:52:00 PM
Sorry man,

Picture a very thin (less than 1/16") high pressure jet of water, with a trickle of fine abrasive in the stream.

Imagine that this little water stream can bore through 12" of solid titanium (1/4" cedar even more easily)

Now picture this attached to robotics that can follow any contour that you can draw on a computer.

This would be a really cool way to cut holes/vents in cedar for trays, etc. Tou probably could even cut dovetails with some experiemntation for fit.

Mrs.Tank
Tuesday, March 8, 2005 6:47:00 PM
Hey Andy,

Email me at debbiepriebe at yahoo dot com

John hay Cigars
Wednesday, March 9, 2005 3:31:00 AM
Andy, I want one them tools. Wanna trade?
andytv
  • andytv
  • Herf-A-Holic Topic Starter
Wednesday, March 9, 2005 5:33:00 AM
I'll see if my boss is up for that.

Do you have about 25,000 super-premiums??

andytv
  • andytv
  • Herf-A-Holic Topic Starter
Wednesday, March 9, 2005 5:34:00 AM
Actually,

I have seen these things (much smaller than ours) for around $20K used. They would have a 2' x 4' table (your workpiece could not be larger than that).

Ours is 12 x12'.

teedubbya
Wednesday, March 9, 2005 6:03:00 AM
How about a tini cedar wine rack like thing to put in your humidor or coolerdor where each cigar does not touch another but just barely touches the rack at one or two points. Like the diamond shaped wine racks. Total airflow around the cigar.
andytv
  • andytv
  • Herf-A-Holic Topic Starter
Wednesday, March 9, 2005 7:32:00 AM
That would be cool, except you'd have to be fairly consisent with the cigar sizes you put in your humi
teedubbya
Wednesday, March 9, 2005 9:16:00 AM
Andy - I'm thinking if you made each openings large enough to hold a mid 50 or 60 gauge length doesn't matter (I'm sure there is a joke about girth Vs. length here, but I'm much too sophisticated to say it 🙂

Think like a lattice or better yet two lattices. one touching the cigars about a third from the foot the other about a third from the other end.

Or not 🙂