Mr. Fiend,
I think I see your problem; Agrosoak type crystals are not conditioned to regulate RH; they are just reservoirs that release moisture slowly from the most humid (themselves) to the less humid (your humidor). You MAY be able to achieve your desired RH goal, but it will be a result of several variables, which can change and affect your overall success.
You will need to use them in conjunction with a 50/50 PG solution or you WILL get very high unregulated humidity. The PG solution only releases moisture when RH drops below 70% (if it is a true 50/50 mix), and then absorb humidity if it climbs above 70%.
Climmax, conservagel, etc beads are conditioned to maintain a specific range of RH, so you only need to add distilled water.
The BIG advantage, as far as I can see, is that when the RH is regulated by the actual "container" (i.e. wall of bead) ONLY water is required. When it is regulated by the chemical solution (i.e. PG 50/50 w/ agrosoak, wet foam, etc) the ratio of the mixture changes as water evaporates, so there is no real good way to keep accurate RH.
In my sweaterador, I use a conatiner of PG 50/50 without any media (foam). I keep an eye on the level, and when it drops I add water. PG does not evaporate so by adding water, I correct the concentration.
Short answer..............buy conservagel (Climmax is getting rare), or dry your agrosoak and then add a 50/50 PG solution to it.