Abrignac
Tuesday, January 13, 2015 9:23:42 AM
Anyone know what kind of a cutter this is?cutter_sm.jpg
DrafterX
Tuesday, January 13, 2015 9:28:51 AM
Looks like CROS' old cutter to me.... Where'd you get it..!! 😠
Abrignac
Tuesday, January 13, 2015 9:44:42 AM
From CROS. I traded him a Papas Fritos and a pouch of Bugler.
ZRX1200
Tuesday, January 13, 2015 10:21:58 AM
A guillotine
Buckwheat
Tuesday, January 13, 2015 10:26:00 AM

A guillotine

ZRX1200 wrote:

Smart Asses think alike. 🍺

banderl
Tuesday, January 13, 2015 12:35:56 PM
Cigar?
Thunder.Gerbil
Tuesday, January 13, 2015 12:43:34 PM
Old and busted.
Abrignac
Tuesday, January 13, 2015 1:23:05 PM
Silly me. Why I expected an help from a bunch of assh*les, of which I consider myself a proud member, is beyond me.

Carry on.

cacman
Tuesday, January 13, 2015 2:44:21 PM

A guillotine

ZRX1200 wrote:

And it looks dull.

TIGERCDW
Tuesday, January 13, 2015 3:55:57 PM
Is it yours or a pic you found?

TIGER

edin508
Tuesday, January 13, 2015 4:28:00 PM
Looks like you need a new cutter.
madspackler
Tuesday, January 13, 2015 5:09:34 PM
PMS

Dont want to reference a competitor. Pretty liberal ban hammer recently!

Abrignac
Tuesday, January 13, 2015 5:24:08 PM

And it looks dull.

cacman wrote:

Actually, I had just sharpened the blades. It cuts real clean, but I have to tighten the last remaining screw with my fingernail every time I use it.

I'm hoping I can get some replacement screws.

Abrignac
Tuesday, January 13, 2015 5:25:37 PM

PMS

Dont want to reference a competitor. Pretty liberal ban hammer recently!

madspackler wrote:

Thanks Eric. I don't know if the mothership carries it, but lots of online shpos do.

banderl
Tuesday, January 13, 2015 6:49:50 PM

Actually, I had just sharpened the blades. It cuts real clean, but I have to tighten the last remaining screw with my fingernail every time I use it.

I'm hoping I can get some replacement screws.

Abrignac wrote:

How about some Locktite or epoxy?

spectresquad
Tuesday, January 13, 2015 6:54:31 PM
If you have access to old laptops the screws out of them are good quality small screws, and if they have some blue junk on the threads that is thread locker so you do not have to retighten all the time. Another hint is to swipe some fingernail polish from wife or girlfriend, sister, or just buy some clear polish at Walmart. It is useful to keep screws from loosening, keeping string and rope from unraveling.🌫
Abrignac
Tuesday, January 13, 2015 6:57:43 PM
Loctite and epoxy, etc won't work. Those are more permanent solutions than I'm looking for. I want to be able to loosen the screws and remove the blades so they can be sharpened.

Laptop screws are too big. Can't drill out the holes because then the blades may not clear.

Plowboy221
Tuesday, January 13, 2015 7:06:36 PM
🤐 you just want me to send you a cutter? I think I have a couple laying around I never use…
Abrignac
Tuesday, January 13, 2015 7:19:00 PM

[-( you just want me to send you a cutter? I think I have a couple laying around I never use…

Plowboy221 wrote:

I'm good. I don't need anything. The cutter is one of five that I have. But, it's also my favorite. I'm the guy who has favorite things and will use them until they are absolutely unusable, then I'll use them some more even if I have a brand new replacement. If I get bombed with cutters, I'll just send them out to someone else. Don't waste your time.

Hell, I wore a pair of work boots until the insides started coming apart. No matter that I had a brand new pair of the exact same boot in the closet for a year before I swapped them out. I wore my favorite pair of jeans until my balls rubbed through the crotch. I'm good. I don't need anything.

As far as cigars, I'm good there. I have a tower humidor with plenty of smokes. Plus, I just won 70 smokes on the college pick'em. I'm good. I don't need anything.

[ram27bat]

Abrignac wrote:

csgamecock
Tuesday, January 13, 2015 7:32:48 PM
^^^^^^^^^^^^^^^^^

I'm calling bullchit

Mobile! Terms | Privacy | Contact Us | Help | © 1998-2026, CigarBid.com