tailgater
Monday, June 13, 2005 5:42:00 AM
Will a high quality butane "cure" a crapped out torch?
J.Redleg
Monday, June 13, 2005 5:49:00 AM
It's a preventive medicine - not a cure.

If you're having problems with your non-zippo lighter(meaning you have a high pressure flame) try the following: 1) use compressed air to blow out the part of the lighter where the flame comes out - tiny debris can disrupt good operation; 2) use a paperclip and purge out your reservior - you may have a pocket of air that's trapped inside; and 3) refill lighter with good butane, I like the Colibri triple refined.

Hopefully this will help get your lighter up and running. Good luck!

bloody spaniard
Monday, June 13, 2005 6:20:00 AM
Good advice except for the Colibri butane which is very poor.

Try King(3x refined) if the Lava (5x) is not available.

MACS
Monday, June 13, 2005 9:37:00 AM
Google VECTOR KGM Butane. Quintuple refined and very affordable. I just got 3 huge cans for $20.
andytv
Monday, June 13, 2005 7:09:00 PM
Nibo makes what seems to be a good butane product.
Club3006
Tuesday, June 14, 2005 3:45:00 AM
Lava is the bomb. My Colibri has worked perfectly ever since I made the switch.

CF

ASC
  • ASC
  • Aficionado
Thursday, June 16, 2005 6:37:00 PM
Did a search for purge/purging with nothing coming up.

Have a zippo insert that I filled up...used it on two occassions and it's already out of fuel. Thinking maybe because I didn't purge it the first time but tried filling it up straight away.

Any further info/guidance on how to purge would be appreciated...like I said...searched the boards with no luck.

J.Redleg
Thursday, June 16, 2005 7:03:00 PM
I use a paper clip, but anything firm and small enough to push down on the refill nipple to let out all the air will work. If your lighter seems dead, drain out the entire lighter and refill it. I would highly recommend buying some compressed air to blow out the flame end. The screen where the flame comes out of gets clogged with small particles that you could barely see.

As you can see by my lack of technical terms that I am by no means an expert, but I'm successful using these simple techniques.

Good luck,

John