NiteOwl
  • NiteOwl
  • Connoisseur Topic Starter
Saturday, January 14, 2006 1:40:00 PM
Burning question:

I’ve had several sticks (different brands) from my humi in the last few weeks that have presented me with burning issues. They light up just fine, with nice even burn, but after the first tipping of the ash, the wrapper ceases to burn at the same rate as the filler. I don’t really notice at first because the cigar continues to smoke and taste normal. Some time later I observe that I’m smoking the filler only, with the wrapper only lightly discolored and crinkling at the end. It’s an easy fix with my torch to even up the wrapper and filler, but I was just wondering if any of you have experienced a similar situation and what may be causing this to happen. RH stays at 65-70% according my digital.

Stevo8785
Saturday, January 14, 2006 2:24:00 PM
don't ash the cigar so much

DiceMan
Saturday, January 14, 2006 3:26:00 PM
don't ash the cigar so much?

I have that from time to time. I like to clip the cigar and take a few draw off it, and let it sit for 10-30 to get air time. Try that.

But that's just me.

deadeyedick
Saturday, January 14, 2006 5:13:00 PM
Burning maduros? Some manufacturers don't match the filler, binder and wrapper's burn characteristics well which can result in "tunneling".

This seems to be more prevelant with maduros in my experience. If the RH is steady then it's probably not something you can correct.

DED

SteveS
Saturday, January 14, 2006 5:41:00 PM
maintaining RH at no more than 65 and being careful to light the cigar evenly will preclude a lot of those sorts of problems ...
jackconrad
Saturday, January 14, 2006 6:32:00 PM
Usually that means the cigar is young. Put them to sleep for awhile.
keitha13
Sunday, January 15, 2006 3:57:00 AM
sleep yeesssss sleeeeeeeeeep

I too have found that the burn better with some humi time, also rotating them seems to work. I had constsnt burn problems with Gurkha Legends, and Master Select.

tailgater
Sunday, January 15, 2006 5:01:00 PM
Lay off the hot sauce.

Oh, sorry. I saw the title of the thread and thought...

Oh, never mind.