If you are using so much water that your humidifier is dripping, and your hygrometer is still reading low, then your hygrometer is not functioning correctly.
First; dry out your humidifier.......it should only be moist, not dripping.
Then check/calibrate your hygrometer. Fill a bottle cap with salt and moisten the salt; just enough to dampen it, but not enough that it is soupy. Place this in a ziplock or tupperware type container WITH your hygrometer. Check it after 5-6hours......it should read 75%. If it doesn't, adjust it (if you can) by turning the slotted thingy in the back. If not, just note where it is reading so you can identify what it read at 65-70% RH.
Once you get this squared away and everything back together, and it still reads low, think about getting a new humi or troubleshooting the seal.
To get a better idea of humidification, etc, search on these boards for;
beads
pg 50/50
propylene glycol