MrMcguyver
Friday, July 28, 2006 1:38:00 PM
It wasn't long ago I learned that if you over-saturate the beads when you wet them, it defeats the purpose of having the beads because they cannot absorb moisture if there's too much.

So I learned to keep them the yellowish mid-range color.

But I have an idea...

Suppose, just suppose, you put two containers of beads in your humidor. One contained beads that were 100% saturated and the other, on the other side, contained beads that were dry. Theoretically, it would work well. Obviously, EVENTUALLY, they would balance out and each contain about the same moisture level at a perfect midpoint, but it WOULD be a FOOLPROOF way to wet them.

I'm going to toy with the idea once a shipment of accessories arrives. I'm going to try it by taking the foam out of a pair of disks, replacing it with beads, and attaching both to the inside top and see what happens.

On second thought, I may do it with two shot glasses in opposite corners of a 100-box so I can see what the beads are doing.

-Jim

.

johnfs
Friday, July 28, 2006 1:42:00 PM
This coming from a guy that can make plastic explosives with match heads and chewing gum.
nine999
Friday, July 28, 2006 1:57:00 PM
lol-

MrMcguyver
Friday, July 28, 2006 2:59:00 PM
So I MUST know what I'm doing!

Laugh it up. But next time your daughter is kidnapped by Russians and held in a mannequin warehouse because you sold nuclear secrets to pay off your gambling addiciton, DON'T CALL ME!

-Jim

.

stickme
Friday, July 28, 2006 6:27:00 PM

jim...run that one through the mill..just one more time

BikerBob1961
Friday, July 28, 2006 6:32:00 PM
The only problem I see is that when they both level out you will have 2 containers at about 50% and when you refill one the other will be about 40% so one will be at 100% and the other will be at 40% there abouts or there abouts, so you would need to dry the other one out. Why don't you jout spritz the beads with a little distilled water when they turn mostly white. Just my .02 worth.
Whistlebritches
Saturday, July 29, 2006 9:41:00 PM
Mcguyver,

This is exactly what I have done in my tubidor.Works perfect.I put an ink mark on the container that gets sprayed with distilled water.The other is used for absorption.My tub stays between 65-68% all the time.I think in 3 months I have added water twice.Probably gets opened once every 10 days or so.

Now get yourself out there and save the world with a q-tip and a pocket knife.

Ron

MrMcguyver
Wednesday, August 2, 2006 9:17:00 AM
BikerBob1961 MIGHT have a point, but I don't know. The 50/50 theory doesn't take into account that some moisture is escaping the box and being absorbed by the cigars. It would take a LONG time of having an over-wet wet container to cause the dry container to reach 50%. Remember, the "dry" container is also giving off moisture as well as absorbing it.

If I only ever physically wet the wet container when I think the whole system needs more moisture, the system should work pretty much eternally. I just don't have to worry about over-wetting the wet side because the dry side will pick up the excess.

You're assuming that the wet container will always be over-wet. It won't. It'll dry out over time and will get wetted to 100% again in a few months.

My theory still holds water. (Yuck-yuck, snicker, snicker.)

-Jim

.

jpotts
Wednesday, August 2, 2006 9:50:00 AM
"Ok, 1/2 of Cliff's brain is on a train, leaving Boston at 30 miles per hour, and the other half is leaving..."

"What a second! That's a trick question!"

"Why?"

"Because Cliff doesn't have a brain!"

(From an episode of Cheers.)