herfsnipe
Saturday, July 14, 2007 7:00:00 PM
The Home Depot

"You can do it, we can help, but probably won't, because we're on break."

This $hit's easy bro. Once you understand flow, it's on to the mechanical stuff. All you have to do is TRY.

jwilmot
Saturday, July 14, 2007 7:19:00 PM
As a former PLUMBER I will defend them by saying two things! this is why they charge so much!

1) HUGE liability if you F it up and it trashes the nice purdy floor.

2)Cus people don't want to waist the 2 minutes it would take to google how to do it themselves. And they like to see the CRACK HEHE.

Johny

jackconrad
Saturday, July 14, 2007 10:18:00 PM
PLUMBING IS JUST PLAIN HARD WORK, YOU NEEED TO BE A CONTORTIONIST,ELECRICIANS HAVE FUN IN ATTICS AT 110 DEGREES TOO.
MACS
  • MACS
  • Herf-A-Holic Topic Starter
Saturday, July 14, 2007 10:46:00 PM
Plumbers are pricey because they have to work with sh*t. Literally.

Not many people have the stomach for that.

bloody spaniard
Sunday, July 15, 2007 7:45:00 AM
I have found that with plumbing 75% of the battle is having the right tools/parts. If not, a 3 hour job can turn into a 3 day project.

Btw, I came across a product called J-B Weld that "cold welded" my wrought iron furniture beautifully. All you do is mix the contents of the steel tube with that of the hardener & voila, you have a mixture with welds permanently after 15 hours. Works great & is easy to apply.

Hope you had a good time, Shawn.

Thunder.Gerbil
Sunday, July 15, 2007 8:45:00 AM
^^^

JB-Weld also comes in a fast set version. I forget exactly what the curing time is, but I think it's like 2-4 hours.

One thing with JB-Weld is that once the component tubes have been punctured, they start to degrade. A few months or so after opening the tubes, the stuff just won't harden fully or takes longer to set up and doesn't seem to "hold" as well. I can't pin an exact timeframe on the degration process, but it does happen. Nor can I say if it's due to exposure to oxygen or the evaporation of certain chemicals from the mix. At $3.75 for a kit that is more than sufficient for most jobs, I don't care either, if I have tubes around that were opened more than a few months ago, or I'm using it for anything high-heat/high-stress, I just toss them and get new ones.

Oh, if you think JB-Weld is neat, you ought to try Belzona, just don't ask how much it costs, because if you do, you won't want to buy it.

bloody spaniard
Sunday, July 15, 2007 8:55:00 AM
^ Thanks for the tips, bro!
jjohnson28
Sunday, July 15, 2007 1:22:00 PM
I had a most excellent time bloody. Thank you for asking...LOL