i have one of the old 12 tray box press that i found in a vegas junk yard in perfect condition. each tray has a lip on both sides, one in ther middle, and the front. rollers would put one or two more fresh cigars in each side of the tray than it should hold, and than stack the next tray on, and on until the top, a one inch board with edges to prevent it from pushing too hard into the cigars, and two metal brackets one on each side are slid over the top and the mold set aside to cure. this set up is for a 5 inch cigar. this was the "cuban tradition" not all cigars were cured that way but all cigars cured that way came from cuba. no digital camera, but i'll be happy to send some polaroids if you are interested.