youngra
  • youngra
  • Herf-A-Holic Topic Starter
Sunday, July 20, 2014 9:01:36 PM
Looking for some advise as I am splitting a lot of caps with my new Xikar punch. Maybe I'm not holding them close enough to the cap?? Thoughts appreciated, smokes are still smokable, mostly - ruined one MUWAT +11 - cracked her bad....[ram27bat]

RY

🇨🇮

Thunder.Gerbil
Sunday, July 20, 2014 9:22:42 PM
Have you tried a Falcon Punch?
frankj1
Sunday, July 20, 2014 9:27:18 PM
try a lumbar punch
Puffnstuff79
Sunday, July 20, 2014 9:35:44 PM

Looking for some advise as I am splitting a lot of caps with my new Xikar punch. Maybe I'm not holding them close enough to the cap?? Thoughts appreciated, smokes are still smokable, mostly - ruined one MUWAT +11 - cracked her bad....[ram27bat]

RY

🇨🇮

youngra wrote:

Had the same cigar have a horrible crack problem. May have been part that too.

bs_kwaj
Sunday, July 20, 2014 9:55:55 PM
Are you just pushing it straight in, or do you giver her a little twisting action?

(No... really, this is about a punch and a cigar.)

😕

youngra
  • youngra
  • Herf-A-Holic Topic Starter
Sunday, July 20, 2014 9:58:19 PM
Still waiting for Palama to show up with a nice Hawaiian Punch....................................
mikey1597
Sunday, July 20, 2014 10:01:22 PM
I'm always up for a donkey punch.
sd72
Sunday, July 20, 2014 10:02:06 PM
Moisten the cigar, a punch is a personal item, push the punch lightly while twisting back and forth. Let the blade slice the cap, not push through it.
opelmanta1900
Sunday, July 20, 2014 10:04:31 PM

Moisten the cigar, a punch is a personal item, push the punch lightly while twisting back and forth. Let the blade slice the cap, not push through it.

sd72 wrote:

^ THIS ^

sharing a punch cutter is like sharing a toothbrush...

clickbangdead
Sunday, July 20, 2014 10:15:46 PM
+2 if the cap isn't a little moist it'll crack most every time. I don't use anyone's punch but my own.
ZRX1200
Sunday, July 20, 2014 10:23:23 PM
Pu$$ies....I know who to send my used toothbrushes to now anyways.
Abrignac
Sunday, July 20, 2014 10:29:21 PM
I use a sharp guillotine cutter and snip very thin and clean. No problem.
KingoftheCove
Sunday, July 20, 2014 10:31:20 PM
v-cut for the win.....
Palama
Sunday, July 20, 2014 11:39:24 PM

Still waiting for Palama to show up with a nice Hawaiian Punch....................................

youngra wrote:

🤣 Hoh! Asleep at the wheel! The perfect straight line but missed my chance for a zinger.... 🤦

Puffnstuff79
Sunday, July 20, 2014 11:57:00 PM
Xi2 and v. Punches are a thing of the past for me. A good percent of the time I was hacking the foot off because of build up. And no, I am not willing to slow down my smoking speed. I slowed down enough from cigs to cigars. I accept that my cig past stays with me to make me a faster cigar smoker than normal but that tends to be ok with anything but the punch
Puffnstuff79
Sunday, July 20, 2014 11:57:57 PM
Oh and yeah, ahem, moisten the tip
stogiemonger
Monday, July 21, 2014 5:49:40 AM
I've damaged about 1/4 of the caps I've punched. I gave up on the punch for this reason.
chazbo
Monday, July 21, 2014 6:42:57 AM

+2 if the cap isn't a little moist it'll crack most every time. I don't use anyone's punch but my own.

clickbangdead wrote:

There is enough saliva licked on most cigars when then make them#-o

V-cut problem solved 🇨🇮

dstieger
Monday, July 21, 2014 10:32:24 AM

Have you tried a Falcon Punch?

Thunder.Gerbil wrote:

Or, perhaps a 'BT' punch? ......sigh....I am getting old

youngra
  • youngra
  • Herf-A-Holic Topic Starter
Monday, July 21, 2014 11:19:46 AM
Thanks all for the replies - 🍺 🌫

I've always moistened the tip when using my cutter, guess I never thought of that with a punch. I'll give it a try and see how it goes. And yes I do the twist and push [whip]

RY

🇨🇮