cigar searcher
11 years ago
Looking for opinions on what is the main cause of the outer wrapper to split as you smoke. My cigars are kept in a tub a dor with hunidity ranging from 69 to 72, I rarely smoke ROTT so they have pklenty of time to rest at the right humidity. But I do get one sometimes two out of 10 sticks to split. Appreciate your answers. Thanks Rob
Abrignac
11 years ago
Quit buying Gurkhas.
ZRX1200
11 years ago
72 is too high, and cold temperatures can do that to any cigar.
edwarderc2
11 years ago
Particularly ones with a thinner wrapper, like a Cameroon.
delta1
11 years ago
They may be too wet, as mentioned above. The extra moisture can cause the cigar to swell as it heats up and burns. Try lowering the rh in your tubador to the low-to-mid 60's.

Do you pinch your cigars before you light them? Or pinch them if the draw is tight? That could also be a culprit.
danmdevries
11 years ago
70% is too wet.

tonygraz
11 years ago
Are you using a digital or analog hygrometer ? What temperature are you storing at ? Perhaps your readings are off and your cigars are actually a bit dry. Even under ideal conditions, handmade cigars are not all exactly alike and every once in a while a wrapper will crack. It's not a disaster, if the binder is intact you should still have a good smoke.
kombat96
11 years ago
Depends on how he's cutting them. When I was a noop I'd cut to far up and split the stogie.

Betcha know it alls didn't think of that. Snob elites.
QMPASH
11 years ago

Looking for opinions on what is the main cause of the outer wrapper to split as you smoke. My cigars are kept in a tub a dor with hunidity ranging from 69 to 72, I rarely smoke ROTT so they have pklenty of time to rest at the right humidity. But I do get one sometimes two out of 10 sticks to split. Appreciate your answers. Thanks Rob

cigar searcher wrote:


72 is a bit high, but splitting sounds like a dryness problem, a thin wrapper or possibly both. Do you buy online or from a local store? It sounds like there may be a problem with the wrapper on your cigar, which brings up another question. Do you have this problem with several brands or just one? If it is the latter, you might want to consider trying another brand. If it is the cigar that is at fault, ask whoever you bought them from for an exchange or refund. If the problem persists, then it is your humi. Try lowering the humidity in your humidor and see if this resolves the problem. If not, you might want to consider investing in a more "upscale" humidor with kiln-dried Spanish Cedar. Hope this helped.
cigar searcher
11 years ago
thanks to you all for your posts, my guess is Delta 1 has it right and many of you think the RH i9s too high so I will drop it down and see if that helps. Its just not one brand its different brands, so the fault is on my end. I only use digital hygrometer. I use a Palio Gullitine cutter and only shave off a paper thin layer. No0t sure about the thin wrapper idea, I smoke Asylumn, Torano, Gurkhas, Obsidian,La Herebcia Diesels ands Pueblos, I have seen this happen to most of these, its got to be the humidity but I tend to keep it high because the cigars feel dry and hard. I think thats typical of cigar bid .com sticks. Thanks everyone. Rob
Abrignac
11 years ago

thanks to you all for your posts, my guess is Delta 1 has it right and many of you think the RH i9s too high so I will drop it down and see if that helps. Its just not one brand its different brands, so the fault is on my end. I only use digital hygrometer. I use a Palio Gullitine cutter and only shave off a paper thin layer. No0t sure about the thin wrapper idea, I smoke Asylumn, Torano, Gurkhas, Obsidian,La Herebcia Diesels ands Pueblos, I have seen this happen to most of these, its got to be the humidity but I tend to keep it high because the cigars feel dry and hard. I think thats typical of cigar bid .com sticks. Thanks everyone. Rob

cigar searcher wrote:



No surprise there. See #2.
TMCTLT
11 years ago

Depends on how he's cutting them. When I was a noop I'd cut to far up and split the stogie.

Betcha know it alls didn't think of that. Snob elites.

kombat96 wrote:




Your so Full of Chit.....just because you did dumb **** doesn't mean everyone did. ( and typically cutting " too much " tends to cause unraveling NOT splitting!! )
madspackler
11 years ago
High humidity is one potential culprit, but I have seen this happen when you try to smoke a cigar like a cigarette and herf it too fast or too hard.

How long is it taking you to enjoy a smoke? For most cigars it should be between one and two hours. If you are evaporating them in 20 to 30 minutes, you may have your answer. Combine the high humidity and quick smoking and you will be much more likely to split the skin.

deadeyedick
11 years ago
This same thread appears every year about this time. 🤦
ZRX1200
11 years ago
^ see post #3
DD1700
11 years ago
^^^keeps his at 80/80
danmdevries
11 years ago
Get some 65% Bovedas and let em reacclimate to a drier environment.

99cobra2881
11 years ago

Get some 65% Bovedas and let em reacclimate to a drier environment.

danmdevries wrote:




+1
cigar searcher
11 years ago
Thanks again to all of you. I drilled more holes in my tub a dor and I will allow the RH to drop. If it gets too low all I have to do is to tape upsome of the holes. I will let you know the results. Rob
KingoftheCove
11 years ago

Thanks again to all of you. I drilled more holes in my tub a dor and I will allow the RH to drop. If it gets too low all I have to do is to tape upsome of the holes. I will let you know the results. Rob

cigar searcher wrote:


:-k
Users browsing this topic