BTHunter
5 years ago
Hello all,

Any tips on reviving torch lighters that won't hold a flame? I now have 3 torch lighters that will initially spark up but not hold a flame at all. I've tried the can air and purge of the fuel with no luck. I used vector fuel and one lighter is a pretty expensive Vector tabletop torch that maybe worked for 2 months before it started acting up.

Thanks for your input!
izonfire
5 years ago
Recharge em with your ass gas, ButtHole Hunter.

Oh, and you’re welcome...
Palama
5 years ago

Hello all,

Any tips on reviving torch lighters that won't hold a flame? I now have 3 torch lighters that will initially spark up but not hold a flame at all. I've tried the can air and purge of the fuel with no luck. I used vector fuel and one lighter is a pretty expensive Vector tabletop torch that maybe worked for 2 months before it started acting up.

Thanks for your input!

BTHunter wrote:



I faced a similar situation with a Xikar lighter and after a couple of tries with the canned air as well as having to empty out the lighter a couple of times, I was so frustrated so just blasted the air into each of the (2) nozzles for like 15 seconds. Refilled and golly, gee whiz, the lighter worked again!

Dunno if that will work for you but at this point in time, worth a try?
bgz
  • bgz
  • Herf-A-Holic
5 years ago

Recharge em with your ass gas, ButtHole Hunter.

Oh, and you’re welcome...

izonfire wrote:



I read it as Butt Hunter... but I like yours better.

Hello Butt Hole Hunger.... what he said.

If the azz trick don't work, then next time buy a cheaper lighter. They all use the same Chinese made crap. There's no difference, they all suck.
Stogie1020
5 years ago
Matches usually work.
Dg west deptford
5 years ago
^ it's this kind of racist privilege talk that is causing so much trouble. Is it really the Chinamens fault your azz gazz can't satiate butt hunger?
BTHunter
5 years ago
One useful response out of 5...I guess batting .200 isn't horrible coming from this forum.
Palama
5 years ago

One useful response out of 5...I guess batting .200 isn't horrible coming from this forum.

BTHunter wrote:



Batting .200 on this site is quite remarkable and definitely could be worse.

As for your handle, I thought the "BT" was for "Buffalo Trace".




Or not. [gonzo]
Jsnyder147
5 years ago

Batting .200 on this site is quite remarkable and definitely could be worse.

As for your handle, I thought the "BT" was for "Buffalo Trace".




Or not. [gonzo]

Palama wrote:



Pretty remarkable indeed.

I think your issue is with the vector fuel. I was using the same stuff and my xikar was puffing all the time. I switched to the Colibri 99.9999999999999999999999999999912% refined stuff. My Xikar has been running like a champ ever since.
Jakethesnake86
5 years ago
^^^^^ yes. The colibri brought all my lighters back from the dead. No trouble since. I think they are cheating out on the fluids. I believe the colibri helps clean the old sh it out of the lighters. Maybe it dissolves the gunk the other fluids leave. I wouldn’t believe it but this happened. I’d recommend a can. It would be a cheap try. It took several tanks. All my lighters are working well again.
I’m the snake
CheapPrick
5 years ago
Search for a posting called "I had really bad gas" ..

The very issue was raised, you might get some answers there if you read the thread.

Good luck
Plowboy221
5 years ago
Xikar PUROFINE butane.... nothing else compares.
LeeBot
5 years ago
I wish I batted .200
bgz
  • bgz
  • Herf-A-Holic
5 years ago
Serious... all lighters suck, even xikars.

You want true advice? Buy the bulk cheapies.
Jsnyder147
5 years ago
Cheap pricks topic is the one that got me to buy better gas.. I’ve heard the Purofine is really good stuff too. I think Borge the xikar and the colibri have the 99.9999999999999999999999% purity.
bgz
  • bgz
  • Herf-A-Holic
5 years ago
I agree with better gas... just don't expect a $30 - $50+ lighter to perform better or last longer than a $3 amazon lighter. They don't.
Users browsing this topic