JHC
  • JHC
  • Herf-A-Holic Topic Starter
Monday, July 16, 2007 12:35:00 PM
When all else fails...turn to the BOTLs.

We have a small copper roof over two of our bay windows. How do you get them to shine again?

Yesterday I tried BRASSO and TARNEX. Even tried jewlery cleaner. The only spots that came up shiny was where I spilled some and it sat on longer than it was supposed to. It may a little dangerous to just pour the bottle all over ( and expensive too).

Also, I am trying to avoid heavy labor such as steel wool.

Any ideas???

StogeeBoy
Monday, July 16, 2007 1:04:00 PM
try some toof paste and a car buffer on high
jpotts
Monday, July 16, 2007 1:05:00 PM
I am not an expert on this.

Stuff like BrassEx and other cleaners tend to be acidic in nature, which means that there is the potential that while cleaning your roof, you're actually eating away at the material. It's akin to dropping a penny into a glass of vinegar overnight, and letting the acid eat away at the outer layer. next morning the end result is a nice, shiny penny.

Using steelwool or an abrasive, by their very nature, erodes the material of your roof as well. It does so by tearing off micro-ribbons and particles from whatever it rubs up against. What produces a shiny copper surface are millions (billions) of fine scratches in the copper that reflect and diffuse light.

That green oxidized build-up generally tends to protect the copper once it is established (which is one of the reasons why copper tends to last a long time as roofing material).

I've heard that after cleaning, a couple layers of a clear polyureathane will keep the original burnished copper color going for a long time. I'd check a handyman web page to see how to do this.

andytv
Monday, July 16, 2007 1:16:00 PM
sell the copper and replace it with gold.
daveincincy
Monday, July 16, 2007 1:16:00 PM
I thought part of the appeal of copper was to have that aged, weathered look. Sure it looks ok shiney and all, but I don't see too many historic homes with polished copper.
jpotts
Monday, July 16, 2007 1:18:00 PM
^ I've seen a few.

I frankly don't like the green-wash look (I can't remember what it's called). However, copper as gutter material is not only pretty durable, but very desireable.

daveincincy
Monday, July 16, 2007 1:25:00 PM
^

don't forget very $$$$$ 🙂

Thunder.Gerbil
Monday, July 16, 2007 1:27:00 PM
Brasso, a 3M ScotchBrite pad and elbow grease is the safest.

You can also get a 3M roto-lock kit at the hardware store and use your corded/cordless drill - but this will leave swirl marks.

You can also use gellied corosion removal agents - go to a boating store like West Marine (do those exist on that coast?) or a ships chandler and talk to them.

pacman357
Monday, July 16, 2007 2:03:00 PM
Copper roof? Friggin' aristocrat!

Point it out to a meth addict. It'll be gone in ten minutes, sold for scrap. Then put some asphalt shingles up, Mr. Fancypants.

Or, just paint it with some Kilz to prime it, then a coat of Rustoleum copper-colored paint. Lazy man's special.

xibbumbero
Monday, July 16, 2007 4:38:00 PM
At the FD we used lemon juice, salt and steel wool. Afterwards we put Star Brite liquid marine polish w/teflon. X
Robustos5x50
Monday, July 16, 2007 5:21:00 PM
I would suggest Googling "cheap copper cleaners" and see what you come up with.
Ram27
Monday, July 16, 2007 6:29:00 PM
Yes JHC, come on now ...............

G O O G L E !!!!!!!!!!!!!!!

Lazy bassard !!!!

LOL

IMHO Leave it alone !!!

victor808
Monday, July 16, 2007 7:11:00 PM
Any cleaning will ultimately shorten its life.

The green is oxidized copper (As others have pointed out). If you remove the layer of oxidation, you expose another layer to air. This just means you will repeat this again (removing another layer) at a later date.

plinytheelder
Monday, July 16, 2007 7:38:00 PM
Whatever you do JHC, try painting it with clear when you get it shiny.

That way it'll stay shiny.

burgess_b
Monday, July 16, 2007 10:54:00 PM
all you really need is some good electrodes, some salt water, and some zinc...NO PROBLEM!
pabloescabar
Monday, July 16, 2007 11:21:00 PM
...pee on it
ddandb
Tuesday, July 17, 2007 4:07:00 AM
Why are you even trying to clean it??

This is your wifes job. Give her some rags, chuck her butt out of the house and tell her to get cracking. (after she brings you a beer)

JHC
  • JHC
  • Herf-A-Holic Topic Starter
Tuesday, July 17, 2007 4:54:00 AM
Rich, only problem with that is that it is about 16' high and I can only get her about 2' up a ladder.

I like the ideas of getting it shiny and keeping a clear coat on it. Will have to look into what kind of clear to use.

Pac, I thought about painting several times then realized it would look painted and I would have to continue to paint...alot. You should see all of the dents in it from where branches hit it.

ddandb
Tuesday, July 17, 2007 5:14:00 AM
Well then forget the whole thing and just have her bring you the beer.
LadyHay
Tuesday, July 17, 2007 5:18:00 AM
Oh Rich, you are just so funny. While he was cleaning the copper roof I was cleaning the inside of the house----windows and floors and bathrooms and kitchen and...

He is right that I won't go on a ladder---I hate ladders. He is lucky if he gets me up 2 feet. I would prefer to keep my feet on the ground.